Technical data
1/54
Miniblock
5/33/24
10
800 V/24 A/2.5 mm
2
8 kV/3
0.5…2.5
0.5…2.5
0.5…1.5
1
)
0.5…1.5
1
)
0.13...2.5 A 2
- *
- *
Type Cat.No. Qty.
2AN/DM 170435 100
2AN/DM BL 170436 100
2AN/DM OR 170437 100
2AN/DM GE 170438 100
Type Cat.No. Qty.
2AN/2/DB 170439 50
2AN/3/DB 170440 50
2AN/4/DB 170441 20
2AN/5/DB 170442 20
2AN/6/DB 170443 20
2AN/7/DB 170444 20
2AN/8/DB 170445 10
2AN/9/DB 170446 10
2AN/10/DB 170447 10
2AN/11/DB 170448 10
2AN/12/DB 170449 10
ZAP ZDUB 170475 50
ZAP ZDUB BL 170476 50
ZAP ZDUB OR 170477 50
ZTW ZDUB 170434 50
SD 0.6 x 3.5 902423 1
DEK 5 047346 500
DEK 5 047356 500
ZS 10/5 161000 480
ZS 10/5 161001 480
Dimensions
Width/length/height (mm) with TS 15 W
Insulation stripping length mm
VDE rated data 0611 Part 1/8.92/IEC 947-7-1/1989
Rated voltage/current/cross-section
Rated insulation voltage to the neighbour terminals
Rated impulse voltage/pollution severity
Further technical data
Clampable conductors:
“e” solid H07V-U mm
2
“f” flexible H07V-K mm
2
“f” with ferrule to DIN 46 228/1** mm
2
“f” with ferrule with plastic insulating collar** mm
2
Gauge pin to 947-1 Size
UL/CSA rated data
Voltage/current/conductor size UL
Voltage/current/conductor size CSA
Ordering data
Centre terminals ZDUB 2.5-2/2AN and 4AN beige Wemid
to be used with TS 15 or Clip versions blue Wemid
in case each individual terminal is not orange Polyamide
equipped with clip or foot
Multipole terminals ZDUB 2.5-2 2 pole
Special versions out off 2AN and 4AN 3 pole
as well as other colours will be supplied 4 pole
upon customer request 5 pole
6 pole
7 pole
8 pole
9 pole
10 pole
11 pole
12 pole
End plate
ZAP ZDUB = 5 mm thick Wemid
ZAP/TW ZDUA = 1.5 mm thick blue Wemid
orange Wemid
Partition
thickness 5 mm orange Wemid
Cross Connection
ZQB 2.5 for ZDUB Type 2 pole
Screwdriver
SD to DIN 5264-A
Marking tags Print
DEK Consecutive horizontal
DEK Consecutive vertical
ZS-10 blank
ZS-10 printed
Mounting rails, brackets, additional marking material and accessories please see relevant Catalogue Section
*) approvals applied for
**) Ferrules crimped gas-tight
1) Crimped with Weidmuller Crimping Tool PZ 6/5 (Cat. No. 901146) 2.5 mm
2
is possible
2) mounting hole for clip 3.5mm panel thickness 0.6-1.2 mm
ZDUB 2.5-2/2AN
10/33/24
10
800 V/24 A/2.5 mm
2
8 kV/3
0.5…2.5
0.5…2.5
0.5…1.5
1
)
0.5…1.5
1
)
0.13...2.5 A 2
- *
- *
Type Cat.No. Qty.
4AN/DM 170454 100
4AN/DM BL 170455 100
4AN/DM OR 170456 100
4AN/DM GE 170457 100
Type Cat.No. Qty.
4AN/2/DB 170458 50
4AN/3/DB 170459 50
4AN/4/DB 170460 20
4AN/5/DB 170461 20
4AN/6/DB 170462 20
4AN/7/DB 170463 20
4AN/8/DB 170464 10
4AN/9/DB 170465 10
4AN/10/DB 170466 10
4AN/11/DB 170467 10
4AN/12/DB 170468 10
ZAP ZDUB 170475 50
ZAP ZDUB BL 170476 50
ZAP ZDUB OR 170477 50
ZTW ZDUB 170434 50
ZQB 2.5 167712 50
DEK 5 047346 500
DEK 5 047356 500
ZS 10/5 161000 480
ZS 10/5 161001 480
ZDUB 2.5-2/4AN