Technical data

1/74
Earth (PE) terminals
Dimensions
Width/length/height (mm) With TS 32 Y
Width/length/height (mm) With TS 35 x 7.5 W
Insulation stripping length/clamping screw/blade size
Rated data VDE 0611 Part 3/11.89
Rated voltage/current at PEN/cross-section
Rated insulation voltage VDE 0110/2.79/Insul. group C
Rated voltage/impulse voltage VDE 0110/1.89/pollution severity
Further technical data
Tightening torque range Nm
Torque setting with DMS2 electric screwdriver
Clampable conductors
“e” solid H07V-U mm
2
“m” stranded H07V-R mm
2
“f” flexible H07V-K mm
2
“f” flexible H07V-K and AEH DIN 46 228/1 mm
2
AWG conductor No.
Gauge pin to 947-1 Size
Ordering data Version
Green/yellow Polyamide
bare
Two clamping yokes, bare
Hexagon socket, bare
Support block
For insulation of mounting rails
in insulated-earth installations
Hexagon key, 8 mm, DIN 6911
Marking material
Consecutive horizontal
Consecutive vertical
1 2 3 4 5 6
8/40/51.5
6.5/56/44
12 mm/M 3/3.5 x 0.6
–/–/4 mm
2
0.5…1.0/0.5…1.0*
2/2
0.33…6
1.5…6
0.5…6
0.5…4
22…10
A 4
Y Qty. W Qty.
035456 100 066116 100
SH 2 049492 10
FW 6.5 046816 –
FS 6.5 046826
6/36.5/49.5
6/56/40
10 mm/M 2.5/3.5 x 0.6
–/–/2.5 mm
2
0.4…0.7/0.5…1.0*
1/2
0.5…4
1.5…4
0.5…4
0.5…2.5
22…14
A 3
Y Qty. W Qty.
047436 100 066106 100
SH 2 049492 10
FW 6 046866 –
FS 6 046876
* TS 32 only
EK 2.5 N
EK 2.5/35
EK 4
EK 4/35
EK 6/35 EK 10
EK 10/35
–
8/56/44
12 mm/M 3.5/4.0 x 0.8
–/–/6 mm
2
0.8…1.6/0.5…1.0*
3/2
0.50…10
1.5…6
0.5…10
0.5…6
20…9
A 5
Y Qty. W Qty.
066126 100
SH 2 049492 10
FW 8 –
FS 8 –
10/40/51.5
10/56/44
12 mm/M 4/5.5 x 1.0
–/–/10 mm
2
1.2…2.4/0.5…1.0*
4/2
0.5…16
1.5…10
0.5…16
0.5…10
20….8
B 6
Y Qty. W Qty.
035466 80 066136 100
SH 2 049492 10
FW 5 047346 –
FS 5 047356 –
Mounting rails, brackets, additional marking material and accessories please see relevant Catalogue Section