Technical data

1/93
Technical data
Dimensions width/length/height
Ordering data
Moulding material KCS/BNC 50
KCS/BNC 75
KCS Support Block
Approvals
Terminal rail (2m)
Steel
Steel (M6 Slots)
Y
Locking pin (1m) – optional Steel
End bracket (thickness mm)
Marking tags
KCS/BNC 50
KCS/BNC 75
Thickness 24mm
Accepts BNC
Plug both sides
24/60/58
Y Qty. W Qty.
950140 10 950145 10
950141 10 950146 10
r a
Type Cat.No. Qty.
TS 32 012280 1
TS 32 067610 1
TS 35 067620 1
SST 3 015270 1
EWK 1 (8.5) 020616 25
EW 35 (8.5) 038356 50
DEKAFIX – Section 3
Connector
support terminal
This connector support terminal is primarily
designed for BNC Connectors where a
central termination or anchor point is
required on a co-axial cable datacom
system, typically in Control Desks, cubicles
or enclosures.
The connector support KCS mounts onto
TS32 or TS35 DIN Rail in the same way as
standard terminals. Because of the
versatility of the product, we can supply
any connector product fitted in the support
i.e. co-axial, fibre-optic, electrical or
pneumatic connector provided its outside
dimensions are within 22mm.
Additional accessories please see relevant Catalogue Section
Connector technical data
Connectors manufactured to comply with BS9210/F0013 &
MIL-C-39012
Impedance: BNC 50 : 50 Ω BNC 75 : Ω
Frequency Range: 0-4 GHz with low reflection to 11 GHz
Voltage Rating: 500 Votls rms
Dieletric withstand voltage: 1500 Volts rms
Material
Centre Contracts Beryllium Copper. Gold Plated
Outer metal parts Brass. Nickel Plated
Insulation Delrin (Du Pont)
Gasket Silicone Rubber
Approvals
r CSA – File No. 12400 – 258. 600V
a UL – File No. E92202 Vol 1. Section 4 10V 50mA 
24/60/58
Y Qty. W Qty.
301862* 10 950147* 10
DEKAFIX – Section 3
KCS
Support Block
W
Thickness 24mm
W Y
Note * KCS Support Block is supplied with no hole or connector