MVD-460 MVD-460 buildin dishwasher - 13
CONTENTS Getting familiar with your machine ………………………………………………………. 4 Technical specifications ……………………………………………………………… Conformity with the standards and Test data ………………………………………... 5 5 Safety information and Recommendations………………………................................ • Recycling .......………………………................................................................................ • Safety information ………………………………………………………………………. • Recommendations …...………………………………………………………………….
Loading your dishwasher .…………………………………………………………………….. 16 Dish rack …………………………………………………………………………………… Alternative basket loads …………………………………………………............................ Standard loading and Test data …………………………………………………………... 15 16 17 Programme descriptions .……………………………………………………………………... • Programme items …………………………………………………………………………... 18 18 Switching on the machine and selecting a programme……………............................... • Switching on the machine…………………………………………………………………..
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. Upper basket with racks Upper spray arm Lower basket Lower spray arm Filters Rating plate Control Panel Detergent and rinse-aid dispenser Cutlery basket Salt dispenser Upper basket track latch 12 $FWLYH Drying Unit: This system provides better drying performance for your dishes.
GETTING FAMILIAR WITH YOUR MACHINE 4 In the stop condition while wash/dry led is On, Start/Pause led will blink. 1.) Power On/Off Button When the Power On/Off button is pressed, the lamp on the Start/Pause button starts lighting. 2.) Door Handle The door handle is used to open/close the door of your machine. 3.) Start/Pause Button Once you press the Start/Pause button, the programme you selected with the programme selector button will start running and the status indicator lamp “wash/dry” will light up.
Technical specifications Capacity ………………………… Height ………………….. ………. Width …………………………….. Depth ……………………………. Net Weight ……………………... Electricity input ……………........ Total Power …………………….. Heating Power ………………….. Pump Power ……………………. Drain Pump Power …………….. Water supply pressure............... Current ………………………….. 12 place settings 820 mm - 870 mm 596 mm 570 mm 42 kg 220-240 V, 50 Hz 2200 W 2000 W 100 W 30 W 0.
• • • • • • • Before installing, be sure that the machine is unplugged. Check whether the indoor electrical fuse system is connected according to the regulations. All electrical connections must match the values indicated on the rating plate. Pay special attention and be sure that the machine does not stand on the electricity supply cable. Never use an extension cord or a multiple socket for making a connection. The plug should be comfortably accessible after the machine has been installed.
• Prior to any repair work on the machine, be sure that the machine is cut off from the mains. Switch off the fuse or unplug the machine. Do not pull by the cable when unplugging. Make sure to turn off the water tap. Recommendations • For energy and water saving, remove coarse residues on your dishes before placing the dishes into the machine. Start your machine after having fully loaded it • Use the pre-wash programme only whenever necessary.
Water connection Be sure that the indoor plumbing is suitable for installing a dishwasher. Also, we recommend that you fit a filter at the entrance of your place or apartment so as to avoid any damage to your machine because of any contamination (sand, clay, rust etc.) that might be occasionally carried in through the mains water supply or the indoor plumbing, and to forestall such complaints as yellowing and formation of deposits after washing.
Electrical connection The earthed plug of your machine should be connected to an earthed outlet supplied by suitable voltage and current. If there is no earthing installation, have a competent electrician carry out an earthing installation. In case of usage without earthing installed, our company will not be responsible for any loss of usage that might occur. The indoor fuse current value should be 10-16 A. Your machine is set according to 220-240 V.
Prior to using the machine for the first time • Check whether the electricity and supply water specifications match the values indicated by the installation instructions for the machine. • Remove all packaging materials inside the machine. • Set the water softener. • Add 2 kg salt into the salt compartment and fill with water up to a level at which it will almost overflow. • Fill the rinse aid compartment.
In order to understand whether or not the amount of softener salt in your machine is sufficient, check the transparent section on the salt compartment cap. There is sufficient salt if the transparent section is green. Salt has to be added if the transparent section is not green. Testing strip The washing effectiveness of your machine depends on the softness of the tap water. For this reason, your machine is equipped with a system that reduces the hardness in mains water supply.
Adjusting salt consumption Adjust the water softener according to how hard your tap water is. Move the programme selector knob to the 0 (Reset) position while your machine is not in operation.1 After resetting your machine, press the Start/Pause button and keep it pressed down.2 Meanwhile, energise the machine by pressing the Power On/Off button. 4 Keep Start/Pause keys press until program monitor lights are on and off. 2 After the lamps “Wash/Dry-End” have flashed 3 , release the Start/Pause button.
Detergent usage Use a detergent specifically designed for use in domestic dishwashers. You can find powder,gel,and tablet detergents in the market that have been designed for household dishwashers. Detergent should be put into the compartment prior to starting the machine. Keep your detergents in cool, dry places out of reach of your children.
• • • They produce good results for certain types of usage only. If you are using this type of detergents, you need to contact the manufacturers and find out about the suitable conditions of use. When the conditions of use of such products and the machine settings are appropriate, they ensure savings in salt and/or rinse aid consumption. Contact the detergent manufacturers if you are not obtaining good wash results (if your dishes stay calcareous and wet) after having used 2 in 1 or 3 in 1 detergents.
Warning: Use only those rinse aid materials which are allowed for use in the machine. As rinse aid residues left as a result of overflowing will create extremely high amounts of foam and thus reduce the washing performance, remove the excess amount of rinse aid by wiping it with a rag. LOADING YOUR DISHWASHER If you properly place your dishes into the machine, you will be using it in the best way in terms of energy consumption, washing and drying performance.
Alternative basket loads Lower Basket Top basket Faulty loads 16
Standard loading and test data Capacity: Upper and lower baskets: 12 place settings. The upper basket should be adjusted to high position Cups should be placed on the dish rack pins.
PROGRAMME DESCRIPTIONS Programme items Reference Programme No Programme names and temperatures 40° C Eco 50°C Super 50 min.
SWITCHING ON THE MACHINE AND SELECTING A PROGRAMME Switching on the machine 1. Press the Power On/Off key. 2. Select the program suiting your dishes via the Program Selection button. Once the Power On/Off key is pressed, the lamp Power Start/Pause is highlighted. 3. Start the program pressing the Power Start/Pause key. The lamp on Program Start/Pause key goes off once the Program starts and the washing/drying lamp is highlighted.
Changing a programme with resetting If you would like to cancel a program while a washing program is resumed Turn the Program Selection Button to Reset Press once the Power Start/Pause key. Press once the Power Start/Pause key. The program will have been cancelled once the drying lamp goes off and the lampFinshed is on. The machine will discharge the water in it for nearly 30 sec. Switching the machine off Pull the plug out of the outlet. Turn of the water tap.
MAINTENANCE AND CLEANING Cleaning the machine in regular intervals prolongs the machine’s service life. Oil and lime may accumulate in the machine’s washing section. In case of such accumulation; -Fill the detergent compartment without loading any dishes into the machine, select a programme that runs at high temperature, and start the machine. In case of insufficiency, use special cleansing material available in the market. (Cleansing material produced special to machines by detergent producers.
Spray arms Check whether or not the holes for the upper and lower spray arms are clogged. If there is any clogging, remove the spray arms and clean them under water. You can remove the lower spray arm by pulling it upwards, while the upper spray arm nut can be removed by turning the nut to the left. Be sure that the nut is perfectly tightened when refitting the upper spray arm.
FAILURE CODES AND WHAT TO DO IN CASE OF FAILURE ERROR CODE Wash / Dry End Start/Pause ERROR DESCRIPTION CONTROL • Make sure the water input tap is totally open and that there is no water cut. • Close the water input tap, separate the water input hose from the tap and clean the filter at the connection end of the hose. • Restart your machine, contact the service if the error resumes. Error of continuous water input • • Close the tap. The waste water in the machine cannot be discharged.
If water is left inside the machine at the end of the programme • The water drain hose is clogged or twisted. • The filters are clogged. • The programme is not finished yet. If the machine stops during a wash operation • Power failure. • Water inlet failure. • Program can be on standby mode. If shaking and hitting noises are heard during a wash operation • Dishes placed incorrectly. • Spray arm hitting the dishes.
PRACTICAL AND USEFUL INFORMATION 1. • • • Whenever you will not be operating your machine Unplug the machine and then turn the water off. Leave the door slightly ajar in order to prevent the formation of unpleasant smells. Keep the machine interior clean. 2. • • • Eliminating water droplets Wash the dishes with the intensive programme. Take all of the metal containers in the machine out. Do not add detergent. 3.
52117261 -1
