Operation Manual

1. Press the Power On/Off key.
2. Select the program suiting your
dishes via the Program Selecti
on
button.
3. Start the program pressing
the Power Start/Pause key.
Swit
ching on the machine
Pr
ogram follow-up
You can follo
w the program flow using the program follow-up lambs located on the control panel.
Changing a programme
If you would like to change programs while a washing program is continuing.
SWITCHING ON THE MACHINE AND
SELECTING A PROGRAMME
19
Once the Power On/Off key
is pressed, the lamp Power
Start/Pause is highlighted.
Press once the Power
Start/Pause key.
Start the program you have
newly selected by pressing
again the Start/Pause key.
The new program started
will resume the course of
the old program.
Once the program is over, the
lamp Finished is illuminated.
Do not open the cover before
the lamp Finished is on.
As long as Washing and Drying goes
on the Washing/Drying lamp goes on
to light .When drying is active machine
stays silent about 40-50 minutes.
The lamp on Program Start/Pause key
goes off once the Program starts and
the washing/drying lamp is highlighted.
After the program stops, select
your desired program via the
Program selection button.