User manual

Setting and starting a washing
programme with delay start
1. Switch on the appliance.
2. Make sure that the appliance is in setting
mode.
3. Set a washing programme.
4. Press the delay start button until the dis-
play shows the necessary delay start of
the washing programme.
The delay start indicator light comes
on.
5. Close the door.
The countdown of the delay start
starts.
The countdown of the delay start de-
creases with steps of 1 hour.
When the countdown is completed,
the washing programme starts auto-
matically.
Do not open the door during the count-
down to prevent interruption of the
countdown. When you close the door
again, the countdown continues from
the point of interruption.
Cancelling a delay start
1. Press and hold the Cancel button until the
digital display shows two horizontal lines.
When you cancel a delay start, you also
cancel the washing programme.
2. Set a new washing programme.
End of the washing programme
The appliance stops automatically.
The audible signal for the end of the pro-
gramme operates.
1. Open the door.
The digital display shows 0.
The end-of-programme indicator light
comes on.
2. Switch off the appliance.
3. For better drying results, keep the door
ajar for some minutes before you remove
the dishes.
Let the dishes cool down before you remove
them from the appliance. Hot dishes are
easily damaged.
Washing programmes
Washing programmes
Programme Degree of soil Type of load Programme de-
scription
Half-
load
1
RINSE AND HOLD
Any Partial load (to be
completed later in
the day).
1 cold rinse (to pre-
vent food scraps to
bond).
Detergent is not
necessary with this
programme.
no
2
INTENSIVE 70°C
Heavy soil Crockery, cutlery,
pots and pans
Prewash
Main wash up to
70°C
2 intermediate rin-
ses
Final rinse
Drying
yes
3
NORMAL WITH PRE-
WASH 65°C
Normal soil Crockery and cut-
lery
Prewash
Main wash up to
65°C
1 intermediate
rinse
Final rinse
Drying
yes
4
QUICK WASH 30' 65°C
1)
Normal or light soil Crockery and cut-
lery
Main wash up to
65°C
Final rinse
no
32