Specifications

7. If the crossing gates on your layout are protecting multiple tracks and one

or more of the sensors are covered, the bell sound will continue to play.

The lights will continue to flash and the barricades will remain down.

Once all sensors are cleared, the gates will go back up.

8. If you have a dimly lit room you may find that your sensors are not

detecting the train. To increase the sensitivity of the sensors turn the

sensitivity pot clockwise.

NOTE – Turning the sensitivity pot fully clockwise sets the sensors to max

sensitivity. In a normally lit room this will most likely be too sensitive and some

shadows may trigger your crossing gate actions. You may need to make a couple of

adjustments to the pot to get it right for your lighting environment.

M.T.H. HO Operating Crossing Gate