Specifications

M.T.H. HO Operating Crossing Gate

18. When activated, the barricade arm is designed to travel from a vertical

position to a horizontal position. 90 degrees of travel. Should the

barricade arm(s) need to be adjusted, loosen the clamping screw on the

actuating arm, move the barricade arm or the wire rod slightly and

retighten the clamping screw.

Find a suitable location to affix the speaker and speaker enclosure, either under the

layout or on top of your layout in a building or hiding in scenery.

1. The speaker enclosure has 2 mounting holes in the back of the enclosure.

Attach the enclosure using 2 of the screws included.

2. Push the speaker into the enclosure.

Speaker Installation

Sensor Installation

The four sensor pairs provided allow you to monitor train movements on up to track

to control the operation of the MTH HO Crossing Gate. There are two main types

of track configurations. One type has the roadbed included or attached to the track

(also includes hand laid ballast). The second type does not have a roadbed attached or

included. The instructions will explain both.