User's Manual

Sleep monitoring
The bracelet can automatically
determine when a user is sleeping
and shows a summary of sleep
time for the previous night.
Further information to monitor
sleep quality such as Deep Sleep,
Light Sleep and Awake times can
be viewed in the APP.
3.
Heart Rate Monitoring
Click the touch area to switch to
the heart rate monitoring interface,
supporting real-time dynamic
heart rate. Wait around 10
seconds for the real-time heart
rate to display.
.
4.
Tips for Accurate Heart Rate Measurement
The heart rate sensor should be in direct contact
with the skin and placed approximately 2 cm away
from the wrist joint. If the bracelet is worn too
loosely, it can result in inaccurate measurements.
Although the real-time heart rate can be obtained
during activity such as walking or running, for the
most accurate results the user should not move the
wrist during measurement.
Be sure that there is no dirt at the bottom of the
heart rate sensor when conduct measurement. Hair,
tattoo and scars may affect the accuracy of the
measuring results.
12
Blood oxygen
Click the touch area to switch to
the Blood Oxygen interface. Wait
around 25 seconds for the Blood
Oxygen level to display.
Blood oxygen saturation (Sp〇2)
is the percentage of the amount of
Oxyhemoglobin (Hb〇2) which
has been oxygenated in the blood
and the total amount of
hemoglobin (Hb, hemoglobin)
Note: In the heart rate monitoring mode, the working
time of bracelet is reduced. Don’t look steadily at
the green light sensor, as this may cause eye
irritation.
Blood pressure
Click the touch area to switch to
the blood pressure monitoring
interface. Wait around 20 seconds
for the result to display
Tips for Accurate Blood Pressure
Measurement:
Measure blood pressure in a
quiet environment and a
comfortable temperature.
Rest for at least 5 minutes before
measuring and avoid nervous,
anxious or exciting feelings.
Measure three times repeatedly
at an interval of 2 minutes.
Record the average value of
readings measured three times.
5.
6.
13