User's Manual

9.2 Find Mobile Phone
Shake the bracelet or press and
hold the touch key for 3 seconds.
The mobile phone will either
vibrate or ring synchronically
depending on the phone settings.
16
Frequently Asked Questions
Failed to nd the device when pairing
Check the bracelet is energized or not.
Make sure the bracelet within 1 foot of the mobile
phone
Make sure the “JYouPro” APP is trusted by your
smartphone by going to your smartphone system
Settings, finding “JYouPro” APP and enabling the
Location and all Notifications. (Specific setting
methods may vary according to different
smartphones)
If you are still unable to connect the bracelet by the
above operations, try switching off and on the
mobile phone Bluetooth setting or restart the mobile
phone.
Note: For iOS smartphones, if you failed to find
“TRK-XXXX’” in the APP, take the following steps:
Go to your smartphone “Settings”->”Bluetooth”.
Under “MY DEVICES”, find “TRK-XXXX’, tap on
the ‘I’ circle -> “Forget This Device” and turn off
Bluetooth
Reboot smartphone and open the “JYouPro”
APP. When asked whether to turn on the
Bluetooth switch, click OK to search and connect
your device.
The Bluetooth connecting icon blinking all the time
Launch APP again to connect successfully to the
bracelet, and the Bluetooth icon should be displayed
normally.
1.
2.
3.
17
9.3 Power Off
Press and hold the touch key for 3
seconds on the Power Off
interface to shut down. In the
shutdown interface long press the
touch area for more than 3
seconds to shut down the device.
The MAC address is used to
identify the bracelet and connect
to the mobile phone.
9.4 Reset
Press and hold the touch key for 3
seconds on the Reset Interface to
restore the device to the default
factory settings.