Specifications

M2M Control
by Infranet Technologies GmbH Ph: +49.40.69647-260
Tempowerkring 2 Fax: [phone]
21079 Hamburg Email: [e-mail]
Germany Web: www.m2mcontrol.de
Technical Manual 1.05, C600 Professional
Page 17 of 24
Installing the SD-CARD
The C600 Professional unit has a standard SD-CARD reader with FAT file-system support
for standard PC-compatibility. Up to 2 GByte capacity is supported. The SD-CARD
features a Push/Push eject system for reliable insertion and operation.
To insert a card into the reader orientate it as showed below, and push the card into the
reader until a click sound occurs. Remove the card by pushing it into the reader until it
clicks and the reader will eject the card. Both the card detect and the write protect
information is available to the user through VPL. Please consult the M2M Control IDE
online help for more information. Avoid removing the SD-CARD during access to the card.
SD-Card orientation
Connecting GSM and GPS antennas
GSM Antenna
The C600 Professional unit contains an SMA Female connector for connection of a
suitable GSM quad band antenna (850/900/1800/1900 MHz). When installing the antenna,
please make sure that the antenna is not in close proximity of metallic parts or anything
else that can influence the efficiency of the GSM antenna. Please consult the installation
guide that follows the GSM antenna.
GPS Antenna
The C600 Professional unit contains an SMB Male connector for connection of a suitable
GPS antenna. The GPS antenna must be a 3V active GPS antenna mounted with a SMB
Female connector.
When installing the antenna, please make sure that the antenna has a reasonable view of
the sky so that it can receive the weak signals from the satellites. Please also consult the
installation guide that follows the GPS antenna.