Note 2 z This manual is subject to copyright protection along with all relevant rights. z No part of this document can be copied, reproduced, changed or translated in whole or in part by any means without prior written consent of M3 Mobile Co., Ltd. z The content of the manual is provided “as-is” and be subject to change at any time without notice. z M3 Mobile Co., Ltd.
Copyright and Agreement 3 z This user manual is provided “as-is”. It may contain editing error or omitting due to the difficulty of expressing technical feature. z If an application program provided by other supplier using by M3 SKY, refer to the supplier for a program manual. z The application program providers have the responsibility of indicating their contact number for customer service on M3 SKY terminal, item box, or program.
Caution when using M3 SKY (1) z User Caution – – – – – – – z Carrying and Storage Caution – – – 4 When the unit is lost or stolen, notify to network provider immediately. Do not rent the unit to third person without authorized permission. Do not use the unit while driving driving. For technical help, contact designated service centers. Contact responding suppliers directly for questions on applications and work programs other than hardware and basic installed applications.
Caution when using M3 SKY (2) z Do not reconstruct – – – z Illegal copy of mobile phone is prohibited – – – 5 Do not reconstruct M3 SKY for any purpose. It may cause fire in the unit, and wound or electric shock to users. Any defect caused by reconstructing units, units can not get warranty. warranty The person who reproduces mobile phone and uses this mobile phone is considered as criminals. Th use off lost The l t or stolen t l mobile bil phone h is i considered id d as a criminal i i l act.
Size and Features Used frequency band WCDMA : 2100 / GSM 850 WCDMA : 1900 / GSM 900 WCDMA : 850 / GSM 1800 GSM 1900 (TX) 824 ~ 849 MHz / (RX) 869 ~ 894 MHz (TX) 880 ~ 915 MHz / (RX) 925 ~ 960 MHz (TX) 1710 ~ 1785 MHz / (RX) 1805 ~ 1880 MHz (TX) 1850 ~ 1910 MHz / (RX) 1930 ~ 1990 MHz Band width 200 KHz (GSM) / 5MHz (3G) External appearance 78.6 x 163.5 x 24.
CONT TENTS Contents 7 z Note 2 LED/Battery attaching/detaching 16 z Copyright and Agreement 3 Charging 17 z C ti when Caution h using i M3 4 How to connect to PC 18 z Size and Features 6 1. M3 Introduction 9 Product Composition 10 Name and function of each part 12 I Input B Buttons 13 Soft/Hard Reset 14 How to use stylus pen 15 2. Basic Usage 19 Calibration 20 Main screen 23 Input screen 24 3.
Contents CONT TENTS 4. How to use internet 8 33 6. Usage of Device 53 Via HSDPA 34 Camera 54 Via Wireless LAN 36 Bluetooth 58 Browsing the Web Site 39 IrDA 63 5.
1.
Product Composition (1) Introd duction z At the first time of opening the product box box, please check if it contains all the basic components, listed as following. M3 SKY main terminal + 2 units of standard battery Ear Mic Phone + 2 units of Stylus pen 10 Cradle + USB cable Portable Adapter The product components may differ depending on the supplied products. CD + ActiveSync 4.
Product Composition (2) z How to use the manual – Introd duction – 11 – – This manual provides detailed information to make using the device easier and faster. The content related to phone or communication in this manual is only applicable when the device is equipped q pp with HSDPA module for Voice and Data communication. The features described in this manual can not be used when it is not equipped in the device (WWAN, WLAN, Bluetooth, IrDA, Scanner, Camera, GPS).
Name and function of each part Introd duction Charge Ramp (Left) HSDPA Status Ramp (Center) Scanner Ramp (Right) a Camera Button Pistol Grip Connecter Scanner Button b Barcode Scanner Window a b Stylus Pen Antenna Mini SD Extension Slot Ear Mic Plug c Volume Button c d Flash Camera Battery Lock e Battery SIM Card Slot Key Pad 12 Charge & USB/serial port Upper (portable) Lower (Cradle) use d, e Infrared Communication Reset Switch Port (IrDA) LCD touch Screen
Input Button Phone/Call button Start button Alphanumeric Left, right function button Left button End button Power button Component Power button Phone/Call function Introd duction End function Input keys Left, right function button Alphanumeric Start button Backspace button Function button Direction Button Volume Button 13 Return button Input keys Backspace button Camera Button Scanner Button Description Press to toggle the device on/off.
Soft/Hard Reset Introd duction ① ② ③ Press ①+② and ③ power button z S ft R Soft Resett - A soft reset allows your device to get a fresh start, similar to rebooting a computer. - This restarts your device and adjusts memory allocation. - All records and entries are retained after a soft reset. - Unsaved data in open programs may in some cases be lost. z To perform a hard reset : z Hard Reset - A hard reset removes power to your device.
How to use Stylus Pen Introd duction z 15 Tap Tap the touch screen one time using a Stylus pen to select and execute items and files. z Drag It is used when you select the text. Please drag the desired part with stylus pen attached on the screen. z Long Press Leave Stylus pen touching the screen for long and you can select the menu on the pop-up screen. You can also select functions available in the designated item using the popup menu.
LED / Battery attaching/detaching z LED Alarm Introd duction – 16 Informs Charging, Scanner Status.
Charging z Introd duction z 17 z Connect plug-in plug in from charger to charge jack of main body, or charge jack of cradle, and then place main body onto cradle. Charging LED Type LED Status Details Direct charging to main body Red Green Charging Charging Complete Cradle Charging (Extra battery charging) Red Green Charging Charging Complete When charging, the status of the battery attached to main body can be confirmed by the LED left of upper corner of main body body.
How to connect to PC z z A cradle of M3 SKY supports charging and USB connection. Connecting step of cradle of M3 SKY is as following. – – Introd duction – – z z Connect charger to USB cradle. (24pin connector) Connect charger to power source. (to wall) Connect USB cable of USB cradle to USB port of desktop PC. Place M3 SKY onto docking cradle then execute Synchronization with Desktop PC.
2.
Calibration (1) z Calibrate the touch screen as shown below, at first time use or when cold (hard) booted. ② ③ Basic Usage ① Tap the screen one time with a Stylus pen 20 Tap the (+) mark with the Stylus pen as it moves around. You can see the screen how to use the Stylus. If you don't need it, click the Skip. ① Press and hold the Stylus pen on the screen then select the Cut on the pop-up menu. ② Press and hold the Stylus pen like the arrow on screen, Tap the Paste on the pop-up menu.
Calibration (2) Calibration continue.... Basic Usage z Set up the standard time zone date, and time. 21 To set up a password, tap 'Next' otherwise tap 'Skip'. To set up a password set up a password type and password. To set up an e-mail account, tap 'Next' otherwise tap 'Skip'.
Calibration (3) Calibration continue.... Basic Usage z Choose outlook e-mail to set up an e-mail account and then tap the 'Next'.(POP3/IMAP/Outlook /E-mail) If you choose outlook E-mail or POP3/IMAP and then tap the 'Next', you should set up it step by step. 22 When all processes are complete, tap the screen to start system. You can see the screen above after the Calibration.
Main Screen z Main screen – Main Screen is set below Button Start menu Start menu Basic Usage Info bar Day/Time info Wireless info User info i f Messages info Task info Today info Lock info Info bar Day/Time info Wireless info User info Messages info Task info Pocket MSN info Today info Lock info Left / Right function info 23 function Select the program you want to use. View the power, modem, sound, input mode and connecting view. View the current date and time. power and state.
Input Screen (1) z To use Input - Process this program " Start > Programs > Word Mobile". To use the Keyboard y Input p Basic Usage z Tap the arrow next to the keyboard icon and then select the h keyboard k b d on the h menu screen as a picture above. 24 This is the Keyboard Input Screen. You can input the letter, number and characters when you click the each icon on the keyboard Input screen.
Input Screen (2) Usage of Block Recognizer input. Basic Usage z Tap the arrow next to the keyboard icon and then select the Block Recognizer on the menu screen as a picture i t above b 25 It is the screen of block recognizer input. In this input screen you can input letters in 'abc' and numbers in '123 ‘ each in the input box seen on the screen screen. In the input screen of block recognizer you can input special letters and characters by tapping th iinputt b the box once.
Input Screen (3) Usage of Letter Recognizer Basic Usage z Select the arrow next to the keyboard icon and then Select the 'Letter Recognizer' on the menu screen as the th picture i t above. b 26 This is the 'Letter Recognizer' screen. In the ‘Letter Recognizer' input screen, you can input the capital letters in 'ABC', the small letters i 'abc' in ' b ' and d numbers b in i '123' each h in the input box seen on the screen. Please choose ‘Options…’ on the input menu.
Input Screen (4) z Using transcriber input Transcriber is a writing recognizer program. It provides you various writing input and input menu. Basic Usage – Select the arrow next to the keyboard icon and then select the Transcriber on the menu like the picture. 27 This is the Transcriber input screen. If you input letters, numbers and characters on the screen with the stylus pen, it would be written automatically on the place where the cursor is blinking.
Input Screen (5) z Input by using Keypad – You can input numbers and letters by using Keypad. Basic Usage Alphanumeric button Convert ‘1 ,A, a’ using the input convert button on the input screen as the left picture. Then you can input capital letters, small letters, numbers and characters using keypads.
3 3.
ActiveSync Introduction z Sync is an abbreviation of “Synchronization” and refers to the process of making data in PDA and desktop computer to be same by linking both data. Active eSync – 30 – z z Sync is an abbreviation of ‘Synchronization” and refers to the process of making data in PDA and desktop computer p to be same byy linking g both data. When either PDA or PC modifies data,, it updates p others to the most recent data. Not all the data is synchronized at same time.
ActiveSync install / connect z To install ActiveSync - Active eSync – 31 – z Select the ActiveSync program in the CD provided, and then install it to the computer. Once the installation is complete, connecting window will start. Connect the cradle with PC using USB cable, and then dock the device on the cradle. When the device is recognized on the PC, Connection will be established after assigning the port for it automatically.
Synchronization of Data z If you see the Microsoft ActiveSync window in the desktop PC, you can find an option icon. If you click this option icon, taps such as “Sync Options”, “Sync Mode”, “Rules” will appear. z “Sync Options” is a menu that you can select an item to synchronize. Active eSync – z 32 “Sync Mode” enables you to choose synchronization methods.
4 4.
Via HSDPA (1) To connect to the Internet via Wireless WAN (1) How to usse Interne et z Tab ‘Start > Settings > Connections’ 34 Select ‘Add a new modem connection’ of ‘My ISP’ in the ‘Connections’. WWAN service is optional. It is not available in the device which does not have WWAN module installed. Put the name you want into the ‘Enter a name for the connection’. Then select the ‘cellular cellular Line(GPRS)’ Line(GPRS) in the ‘Select a modem’.
Via HSDPA (2) To connect to the Internet via Wireless WAN (2) How to usse Interne et z Input the Access point name suitable to the SIM Card / Operator company of Network then Tab the ‘Next’. 35 Tap the ‘Finish’ after input the User name and password according to the setting. ((In some cases,, it is required q to set IP address at the advanced menu.) Select the ‘Manage existing connections’ on the Connections. Choose the ISP which you want to connect to as picture above.
Via Wireless LAN (1) z z To connect directly on the Main Screen How to usse Interne et z You can use the Wireless Network Via Wireless LAN. M3 SKY supports IEEE 802.11b and 802.11g. To connect the Wireless LAN (AP must be on and functioning) On the Today Main screen, you select Wireless state bar or go to ‘Start > S tti >C ti >’ Wi l M Settings Connections>’ Wireless Manager. 36 Tap the WI-Fi on the ‘Wireless Manager' g to turn WLAN on. Wireless LAN is optional.
Via Wireless LAN (2) To connect via Wi-Fi menu How to usse Interne et z On the settings screen, you select Wi Fi Icon. Wi-Fi Icon You can also tap Start > Settings > Connections>Wi-Fi. 37 Configure the connect type then click the 'Next' Next . Configure the connect type then click the 'Next'. Inp t the authentification Input a thentification data then click the 'Next'. After configure Network authentification, tap the 'Finish' 'Finish'. You Yo can see the wireless i eless Networks available.
Via Wireless LAN (3) z Continue from the last page Configure DHCP / Static IP How to usse Interne et – Tap an adapter to modify setting on the wireless LAN card and select the 'Edit'. 38 If you configure the IP as DHCP, Click the 'Use Server-assigned IP address. If you configure the IP as Static, Click the 'Use Specific p IP address.
Browsing the Web Site (1) Microsoft Internet Explorer - Via Wireless WAN , Wireless LAN and Active sync connection, you can browse the web. - You can download programs and files by accessing the Internet. How to usse Interne et z To use the Internet Explorer Tap 'Start > Internet Explorer 39 Address Window Searching This is the Internet Explorer processing screen. I Input t th the address dd you wantt on th the address dd window i d in i upper off the th screen, then th click the 'search'.
Browsing the Web Site (2) Continue from the last page. How to usse Interne et z On the 'Menu > Favorites...' you can see the list of sites that you have saved and browse to it directly. The favorite page is like the picture above. 40 On the Menu > History... You can see the list of sites that you have recently visited. The history page is like the picture above.
Browsing the Web Site (3) To set up an e-mail account How to usse Interne et z Process the 'Start > Messaging'. Select the 'Menu > Tools > New Account...in the outlook E-mail box. 41 Set an E-mail provider for 'other‘ then tap 'Next.' Input the E-mail address on the Enter e-mail address , then tap ‘ Next '. When the Status is for completed, tap p the 'Next'.
Browsing the Web Site (4) Continue from last page How to usse Interne et z Set an E-mail provider for 'other‘ then tap 'Next'. 42 Select the Account Type and put the Name then tap 'Next'. Input the 'Incoming mail, Outgoing mail, Domain' then select 'Finish'. * For detailed setting menu, please click ‘Options’. Options . After finishing the setting you can send and receive E-mail using the e-mail account.
Browsing the Web Site (5) To send and receive an E-mail How to usse Interne et z < To receive an e-mail> Select the 'Message' on the 'Today' Select the 'Send / Receive' in the 'Menu' and check the received mail. 43 After process the 'Message' program , select the 'New' . You can send an e-mail when you select the 'Send' after writing a new e-mail.
5 5.
Init Screen Ho ow to use e the Pho one z Phone Main Screen Network Type GSM Operator HSDPA / Network Status Volume Call Status Contacts Call Status Input Number Input Number Key Pad GSM Operator Phone Menu It shows Call Status. It shows Inputted Numbers. Key Pad It is used to dial the number and can be used as speed-dial. Contact It shows Phone Book Dialog. Network Type It displays the availability of GPRS and EDGE / HSDPA connection. GSM/Network Status It indicates the signal strength.
Phone Control Phone Program On/Off Ho ow to use e the Pho one z Phone Call Send/End SEND END Select the SEND and END button like the picture above to start and finish the Phone program. You can turn on and off phone in Wireless Manager 46 z Tap the Phone button on the left bottom of the Today Screen and then you can process the Ph Phone program. Also Al you can fi finish i h th the program using the X button.
Phone Call and Receive Phone Call z Phone Receive Ho ow to use e the Pho one z To make a call: 1.Input number via program keypad or device keypad. 2 Make a call by pressing the ‘Talk’ 2.Make Talk button on the program, or pressing ‘SEND’ button on the device. 47 To hang up: Press the ‘END’ button on the program or on the device. When you get the Incoming Call, you can receive the phone call tapping the Answer button. If you don’t want to receive it just tap the Ignore button.
Phonebook z To use Phonebook Searching Contacts Ho ow to use e the Pho one New Contact Searching A name or Number. New SIM Contact Contacts Menu Contacts Menu 48 Contacts Option Input the new contact Input the contact to the SIM Card. Send Contact Transmit the information of Contact by BEAM or SMS. Copy/Delete Copy or delete the Contact Options Set the Options for Contact.
SMS send and receive (1) How to send SMS Ho ow to use e the Pho one z Select ‘message information’ menu on the main screen to send SMS. You can also send SMS by selecting ‘SMS send’ menu on Contacts or any other applications. applications 49 Change to the ‘Text Messages’ on the Message Program like the picture above and tap the ‘New’ on the bottom. Input the phone number and message. Tap the send to send SMS. You can see the pop-up screen when SMS is sent successfully.
SMS sent and receive (2) How to receive SMS Ho ow to use e the Pho one z When connected to the GSM network, new message arrivall willll be b alerted l da picture above. 50 By tapping one of the received messages, the content willll be b displayed d l d on the h separate window as picture above. Controlling received SMS can be done by using the menu on the ‘New Text Message' alert window or on the Text Messages program.
Controls while on the phone Ho ow to use e the Pho one Functions while on the phone Change Ch to t Mode M d available il bl to t input the Number on the screen. Mute Setting for receiver not to hear my voice while on the phone. Hold Hold for a moment while on the phone Contact End Move to Contact End phone call Featured functions while on the phone You can use various functions when you select the button on the bottom while talking on the phone.
Phone setting Ho ow to use e the Pho one Phone setting 52 Call Barring Block the calling to the specific number. Caller ID Turn on or off the Caller ID function. If it is enabled, your number will be shown to the receiver. Call Forwarding You can forward the incoming call to the other number. g Call Waiting Voice Mail Text Messages Fixed Dialing Tap the ‘Start > Settings > Personal tap > Phone’ and in that menu you can set the Security and Sounds.
6 6.
To use the Camera (1) z Notice before taking pictures - The camera equipped with the M3 Sky is supported 2 mega pixels.
To use the camera (2) z To process the camera program Usage o of Device e - You can process the camera program when you tap the camera button or tap the camera icon on the 'picture or video'. Select the 'Start > Programs > Pictures & Video. 55 You can process the camera program when you select the camera icon on the Picture & Video or select the camera icon in the menu. Tap the ‘Menu > Options … > Camera Tab’ and then you can set the route of the storage memory , name and quality.
To use the camera (3) Taking a Still photo Usage o of Device z Execute the camera program first. Move around to focus the desired item. Finally press the camera button to take a picture. After executing the camera program , Preview mode will be changed to standby mode after certain amount of time. In order to start Preview Mode again again, just tap the screen or press the camera button. 56 After taking a picture, the captured image will be displayed on the screen.
To use the camera (4) Taking videos Usage o of Device z If you want to take a video, select ‘Menu > Videos' after executing the camera program. 57 While taking a video, you can either stop (by tapping stop button) or pause. (by tapping pause button) If you want to watch the video taken, Select the 'Thumbnails' first to see the list of video files available. When you select the video you want, you can play the video recorded.
Bluetooth Communication (1) Bluetooth On / Off Usage o of Device z On the 'Today Main Screen' , select the Wireless State bar or Tap 'Start > Settings > Connections and select ‘Wireless Manager’. 58 To turn on/off Bluetooth, tap the The status of Bluetooth can be seen Bluetooth on the Wireless Manage on the wireless status bar on the main screen. Bluetooth is optional. Device without built-in Bluetooth can not use Bluetooth service.
Bluetooth Communication (2) z Setting the Bluetooth On the Bluetooth setting screen, you can set the Mode, connecting to BT device and COM settings Usage o of Device - You can set the Bluetooth mode and establish connection when you tap the 'Bluetooth' icon on the Start > Settings > Connections. 59 In the Mode tab, you can turn on/off Bluetooth and make visible or invisible the device from outside. In the device tab, you can search and connect to other Bluetooth devices.
Bluetooth Communication (3) z To connect the Bluetooth Usage o of Device - you can establish the connection by searching, matching pin code and selecting the service. You can search the Bluetooth device available when you select the 'Add new device...' on the Device Tab. Select a device to connect with and tap 'Next' . Also you can select the 'Refresh' button if there is no device available. 60 Enter a Passcode to establish a secure connection.
Bluetooth Communication (4) z How to make the serial connection via Bluetooth It is possible to assign the registered device to the COM port. Usage o of Device – Once the device is registered, please tap ‘COM Ports’ tab and then select ‘New Outgoing Port’. 61 Select the device you wand to add and tap 'Next'. Select the port which is available, and then tab ‘Finish’. Once the connection is made, you can use the available service.
Bluetooth Communication (5) z Transferring files via Bluetooth connection. Usage o of Device - It is possible to transfer files between Windows Mobile devices via Bluetooth. In order to transfer files via Bluetooth connection please go to 'Start connection, Start > Settings > Connections > Beam‘ and then Check the 'Receive all incoming Beams ‘. 62 Select the file you want to transfer in the File Explorer. Explorer Press the file name long and tab ‘Beam File’.
IrDA Communication Usage o of Device z To connect via IrDA M3 Sky can communicate with desktop, notebook, pocket PC as well as other PDA that has OBEX protocol for the IrDA communication communication. To use infrared communication Locate Infrared communication port to be in series with an infrared (IrDA) port with other device. Press a quick link icon > Infrared communication menu. Infrared communication program is started and you can exchange data.
To use the GPS (1) z To set the GPS – Usage o of Device – Tap the ‘Start > Settings > System Tab > GPS’ and then you can set the information related to the GPS. You don’t have to set additional information when there is a single program which uses GPS data. When there are more than one program which use GPS data, you need to set the program port and hardware port required for each program. Select the GPS on the System Tab. 64 Set the GPS Program Port which g is not yet used.
To use the GPS (2) z To Connect the GPS Usage o of Device - When there is a single GPS program, please use the GPS hardware port (COM2). When there are more than one GPS program, please use the pre-defined GPS program port. Execute the GPS program you want. 65 Set the COM Port and Baud Rate. Sample GPS map is not provided by M3Mobile. It is available to use various application using GPS like searching the current location.
To use the Scanner (1) Scanner Manual Usage o of Device z 1 1. M3 ScanTest - It is a sample test program. It is only for testing the scanning feature of the device. It can not be used for business application. 2. ScanEmul - It is a program which can be used to output the scanned data on the application.
To use the Scanner (2) M3 Scan Test Usage o of Device z 67 This program is located under Flash Disk -> Scanner folder You need to select this tab to configure Settings The Scanned Data will be displayed here You can gett th Y the iinformation f ti lik like Fi Firmware version, i DLL version and Decoder version. It is to trigger gg the scan beam. You can also Use ‘S’ button on the right side to trigger it.
To use the Scanner (3) Scan Emul Usage o of Device When you run ScanEmul program, you can see the program Icon is displayed on the tray bar. Using this icon, you can access to the various menus. 68 When you click the barcode icon, you will get This menu popped up.
To use the Scanner (4) Scan Emul Usage o of Device You can set the Reading Option. Sync: Scan Beam shoots until the Barcode is scanned or it’s timed out Async: Scan Beam Shoots while trigger button is pressed or until it’s timed out. Security Level: number of times to check scanned data. (ex, when it is set to 2, it will scan two times and compare the data whether it is same or not not. Time Out: Scanner beam will be shoot for this time set. Min.Barcode Length: Minimum length of barcode to scan.
Usage o of Device To use the Scanner (5) Scan Emul Here you can select the Symbology to enable. 70 You can set the prefix and suffix which will be placed at start and end of barcode data data. You can assign the button to use as a scan button.
To use the Scanner (6) Scan Test z How to use scanner Usage o of Device – Usage of 1D Scanner (MC-7100S, MC-7500S) Correct way – Incorrect way Usage of 2D Scanner (MC (MC-7700S) 7700S) Correct way Incorrect way Scanner is optional. You can not use scan feature with no scanner enabled device. 2D Barcode Scanner is optional. Only with 2D Barcode scanner enabled device, you can do 2D barcode scan.
To use the RFID (1) z To Connect the RFID Usage o of Device – 72 Tap the ‘Start > File Explorer > Flash Disk > RFID’ and then you can run RFID.
To use the RFID (2) z To Connect the RFID Usage o of Device – – Let the upper back of the terminal touch the tag and then tap READ. RFID reader located in the upper-back of the terminal will recognize the tag. You can select Read Mode in Option. In Sync mode, the terminal should reach the tag to read the information. In Async mode, the terminal automatically search around and read the tag. In Continuous mode, the terminal continues to read the tag unless you command to stop.
To use the RFID (3) Support Tag Usage o of Device z 74 RF-ID is optional. Device without RF-ID can not use this feature. Frequency supported only 13.