Instruction Manual

Charging
z
Connect plug
in from charger to charge jack of main
z
Charging in Cradle
z
Connect
plug
-
in
from
charger
to
charge
jack
of
main
body, or charge jack of cradle, and then place main
body onto cradle.
z Charging LED
z
Charging
in
Cradle
Separate Battery
Main body
Charging LED
d
uction
T
ype LED Status Details
Direct charging to main
body
Red
Green
Charging
Charging Complete
Cradle Charging Red Charging
Se
p
arate Batter
y
Intro
d
z When charging, the status of the battery attached to
main body can be confirmed by the LED left of upper
corner of main body Also the status of Sub
-
battery
(Extra battery charging) Green Charging Complete
z
Charging using portable adapter
py
Charging LED
corner
of
main
body
.
Also
the
status
of
Sub
battery
can be confirmed by the LED right of low corner of
Cradle.
Do not use any other charger except one (5.2 V / 3A) provided .
Make sure to handle it gentle; damage with excessive force may cause no warranty.
17
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
When attached battery is completely discharged, plug charger to main body, then reset the
device to check if screen is back on. To use, do at least 10 minute charging.