Instruction Manual

To use the GPS (1)
z To set the GPS
– Tap the ‘Start > Settings > System Tab > GPS’ and then you can set the information related to the GPS.
– You don’t have to set additional information when there is a single program which uses GPS data. When
there
are
more
than
one
program
which
use
GPS
data,
you
need
to
set
the
program
port
and
hardware
there
are
more
than
one
program
which
use
GPS
data,
you
need
to
set
the
program
port
and
hardware
port required for each program.
o
f DeviceUsage
o
Select the GPS on the System Tab.
Se
t
the GPS Pro
g
ram Por
t
which
Set the Hardware port of the device.
64
Select
the
GPS
on
the
System
Tab.
g
is not yet used.
GPS hardware port for M3 sky is
COM2 and with baud rate of 9600.
GPS is optional. GPS feature is not available on the unit with no GPS module integrated.