Instruction Manual

To use the Scanner (4) Scan Emul
You can set the Reading Option.
Sync: Scan Beam shoots until the
Barcode is scanned or it’s timed out
Async: Scan Beam Shoots while trigger
button is pressed or until it’s timed out.
Security Level: number of times to check scanned data.
(ex, when it is set to 2, it will scan two times
and compare the data whether it is same or not
o
f Device
and
compare
the
data
whether
it
is
same
or
not
.
Time Out: Scanner beam will be shoot for this time set.
Min.Barcode Length: Minimum length of barcode to scan.
Sound: you can choose the sound which will ring when the data
Usage
o
is scanned.
Output: you can select the output method.
When it is checked Enter code will be inserted after the barcode data.
69