User’s Manual Ver 1.
Note This manual is subject to copyright protection along with all relevant rights. No part of this document can be copied, reproduced, changed or translated in whole or in part by any means without prior written consent of M3 MOBILE Co., Ltd. The content of the manual is provided “as-is” and be subject to change at any time without notice. M3 MOBILE Co., Ltd.
Danger 1. Never attempt to alter or modify the construction of the device or its components in any way. It may cause fire, injury, electric shock, or serious damage to user or the device itself. 2. Do not use this product in a potentially explosive environment or near inflammable gases. It may cause an explosion. 3. Do not use or operate the device with wet hands. Doing so may result in electric shock to users or device itself. 4.
Content 1. Greetings ................................................................ 7 Components .............................................................................................................. 7 How to use the manual .............................................................................................. 7 2. Introduction of M3 ................................................... 8 Overview of M3 ......................................................................................
Watch ............................................................................................................... 46 Alarm ................................................................................................................ 47 Network and Dial-up Connections ............................................................................ 47 How to make new connection in M3.........................................................................
9. How to use application software ........................... 89 Calculator ................................................................................................................ 89 Image Viewer ........................................................................................................... 90 10. How to use utility programs................................. 91 Menu Setting (Menus)..............................................................................................
1. Greetings Congratulate your purchase of M3 MOBILE Co., Ltd.‟s M3. M3 is a palm-size PC using the Windows CE 4.2(CE.NET). M3 helps you to keep abreast of important business and/or personal information and is easy to handle. M3 adopts Microsoft Windows CE 4.2(CE.NET), which is one of the latest operation systems. Microsoft Windows CE 4.2(CE.NET) enables user to experience the skins and functions of Windows XP and deal with important tasks of the users.
2. Introduction of M3 M3 is a palm-size PC based on the Windows CE 4.2(CE.NET) operating system and powered by XScale PXA255 processor and 16 bits color TFT-LCD screen. “Microsoft Windows Powered Logo” is a Windows OS of Microsoft Corporation and offered by the corporation for built-in system device in operation.
Overview of M3 The pictures below provide information on M3‟s various buttons, ports and other functions.
LED status: LEDs show the current status of M3. LED signals present as follows: Classification LED status Charge LED Red Green GSM/GPRS status LED Flashing Blue Kept blue Blue OFF Scanner LED green Description On charge Charge completed GSM/GPRS standby mode(Within a phone/internet accessible area) GSM/GPRS communication mode (Voice, or internet in use). GSM/GPRS turned off or out of coverage area When the scanner reads barcodes.
Body charge LED Additional battery Additional battery charge LED Warning: Plug in as DC 5V sticker directs upwards as the picture shows. [Charge in the cradle] [Charge through the additional charger] To confirm the completion of the battery charge, check out the color of the upper left LED in the terminal in case of the built-in battery or the lower right LED in the cradle for the additional battery.
Input button function The following is the description of M3 hardware function buttons and other interfaces.
Function button: It is used to change the Function Mode. Every time your press you can confirm the change of mode by looking at the Function Icon on the tray bar. Navigation button: It consists of up, down, left, and right movement. Press the Movement button to select an icon or item on the display or make a movement in documents. Reset button function Soft Reset If an unexpected problem occurs concerning the installed software while using M3, click the Reset button on the lower part of the device.
Hard Reset If you encounter serious application program problems in M3 Device or a problem unsolved by soft reset, you must restart M3 with hard reset. If you press the reset button for more than 4 seconds, the screen will fade out. It will turn off all powers. After that if you press the reset button once again, the system will enter the hard reset mode and re-load OS in the flash ROM. And after 4 or 5 seconds, Microsoft‟s Windows CE 4.2(CE.NET) and a seek bar will appear.
USB Cradle M3‟s USB Cradle supports charging function and USB port connection. The following procedure describes how to connect M3‟s USB cradle: 1. Connect the battery charger to USB cradle. 2. Connect the battery charger to the power outlet. 3. Connect the USB cable of USB cradle to the USB port of a desktop PC. 4. Insert M3 into the USB cradle and carry out the synchronization with the desktop PC.
3. Getting started This chapter explains the way to use M3 for the first time. Take the following procedure. 1. Click the Reset button: Unpack the M3 package. When using it for the first time, the battery power is not connected to M3. If you lightly click the Reset button, the battery power is automatically connected to M3. After 4 or 5 second, M3 enters into hardware reset mode and load images in the flash ROM to SDRAM. The screen will show Microsoft Windows CE 4.2 (CE.NET) logo and the seek bar.
Warning: Plug in as the DC 5V sticker to be upward as the picture! 3. Set up the stylus pen: When M3 is started, on-screen Set-up Wizard will appear. (The on-screen set-up wizard will also appear after a hardware reset) The Set-up Wizard will arrange the tough screen. Press and hold a (+) mark with the stylus pen and keep chasing and pressing the (+) mark as it moves around. When all processes are completed, M3 will automatically show the main screen and now you can do your work in M3. 4.
4. How to connect to a desktop PC To be able to properly manage abundant data and files, you need to link M3 to either desktop PC or notebook. This chapter describes the ways to connect M3 and desktop PC, to conduct synchronization and to transmit data and files. The following is the main points of this chapter. How to install Microsoft ActiveSync 3.
Microsoft ActiveSync Understanding of ActiveSync program Sync is an abbreviation of “Synchronization” and refers to the process of making data in PDA and desktop computer to be same by linking both data. By linking M3 and computer, you can make data in both devices in the same status (synchronization) or install, copy, move, delete programs for business purpose and others.
How to connect M3 to ActiveSync Connect M3 to a desktop PC using a USB cable. Make the partnership between desktop PC and M3 through ActiveSync, then proceed with the synchronization of desktop PC and M3. Use a USB cable to link M3 to the desktop PC. The table below shows available communication devices (USB, serial, infrared) according to operation system.
How to set up a Partnership When you first connect M3 to the desktop computer, Microsoft ActiveSync will ask you if you are going to set up a partnership. Once the partnership set-up is finished, you can synchronize data with M3. While M3 can set up the partnership with two desktop computers, the email message can be received only through one computer. To set-up a partnership: 1. Insert M3 into the USB cradle connected to desktop PC.
4. Window for setting up synchronization appears. To synchronize specific kind of data, select the item then click next. Most popular items include Calendar (schedule), Contacts (contact numbers), Tasks (works), and Xinbox (email, mail box). We recommend you to select and use these items. In the item list, two types of email items are available: Inbox and Xinbox. While the inbox is an email program provided by Microsoft Corporation, Xinbox is offered by a software provider.
How to connect M3 How to synchronize data If you see the Microsoft ActiveSync window in the desktop PC, you can find an option icon. If you click this option icon, taps such as “Sync Options”, “Sync Mode”, “Rules” will appear. “Sync Options” is a menu that you can select an item to synchronize. “Sync Mode” enables you to choose synchronization methods.
For those items that cannot complete synchronization without user intervention, ActiveSync and portable device display them as “not completed” 1. Connect M3 to the desktop computer and carry out synchronization. 2. When there are not completed items, click Resolve items in Tools menu. 3. Follow the instruction on the screen. The dialog box will differ depending on the cause of the problem.
5. Overview of Microsoft Windows CE 4.2 This chapter will deal with Microsoft Windows CE 4.2(CE.NET Korean version), which is the operating system of M3. The content of Microsoft Windows CE 4.2(CE.NET Korean version) introduced in this chapter is as follows: How to use the main Windows How to use a taskbar How to use settings Main Windows When you turn on M3, you will see the main Windows of Windows CE 4.2(CE.NET Korean version), which is similar in appearance to Windows XP.
After emptying the recycle bin, you cannot restore files and data previously in the recycle bin. So be careful when you delete files, data in the bin. Warning Internet explorer: Search the web or intranet. Microsoft Internet Explorer can search the web or intranet of companies. M3 uses Microsoft Pocket Internet Explorer 6.0. Media player: it plays digital audio or video files. If you use Microsoft Windows Media player, you can enjoy a range of digital audio/video files.
Taskbar Windows CE 4.2(CE.NET)‟s taskbar is designed to be simple and user-friendly. The picture below shows the configuration of the taskbar. Start icon Taskbar Start Icon Start icon is the starting point of M3 program. If you point the start menu with the stylus pen, you can see various menus including program, bookmark, document, setting, help, and operation. If you choose each menu, detailed executable programs appear as the picture below.
Taskbar Taskbar shows a variety of information including how to key in character, battery, network connection, status of running programs, etc. If you press and hold the taskbar with the stylus pen, the right button function menu will appear. The right button function menu is composed of task manager and features. For more information on the task manager, refer to the cheaper 9. How to use utility programs.
Screen rotation: It changes the direction of screen. Screen rotation feature let you use your M3 display in either portrait or landscape mode. To rotate the screen: 1. Press the short-cut icon and select the screen rotation. 2. Run application programs. You can use this function in various programs such as My Computer, Media player, My Documents, Internet Explorer, Microsoft WordPad, Image Viewer, Personal organizer Management, etc. Warning 1.
To use infrared communication: 1. Locate M3‟s Infrared communication port to be in series with an infrared (IrDA) port with other device. 2. Press a short cut icon > Infrared communication menu. 3. Infrared communication program is started and the connection status message will appear as the picture above. When the device to be used for communication is found, it will show the name of the device with “send” and “close the connection” icons. 4. To send a file or data, press the icon of “send”. 5.
Wireless LAN: You can use internet with Wireless LAN. Wireless LAN supports IEEE 802.11b. How to make a connection with Wireless LAN: 1. Turn on the AP (Access Point) which supports IEEE 802.11b. 2. TAP on „WLAN ON‟under QUICK MENU icon on the tray bar. 3. Please select the desired access point on WLAN connection manager and TAP on „Connect‟. 4. TAP on „WLAN OFF‟under QUICK MENU icon on the tray bar to finish WLAN connection.
Transcriber: When you want to key in characters in making document or setting, start Transcriber. Using the stylus pen to draw characters you want on the input panel, this program will recognize the characters by itself and transform them into typeface characters. To start the Transcriber, run the program as the following order: start → program → Transcriber. The picture below shows how the Transcriber works in keying in characters on Microsoft Word Pad.
Keyboard: Press this icon to activate the keyboard input. Upper/lower case Selection: Press this icon to change upper and lower case letter. If you select upper case, capital letter and its character will appear on the number key pad. It serves the same function with Shift key. Hot key Selection: If you use hot key such as“z”, “x”, “c” and “v”, you can carry out Cancel, Cut, Copy, and Paste, respectively.
Status Indicator Icon: The following is a list of icon that can appear on the taskbar‟s status area of M3. Status indication icon on the taskbar Icons Details Low battery. Battery in charging. Connected to Desktop PC by USB Quick connection icon Phone program icon Function Status icon Bluetooth Status / Menu icon Keypad Alpha Numeric Status icon Caps Lock ON icon Network connection status.
6. How to Use Bluetooth Bluetooth Power On/Off - The user can on/off the power of Bluetooth by selecting the Bluetooth Tray Icon. ▪ Switch to ON( )/OFF( ) by clicking BT ON/OFF on the popped up menu. Options Menu - Accessibility Tab : Change of BT Device Name, Setting for Discoverable/Connectable Mode and Auto ON. Device Name : It is a Name to be shown when other BT Device discovers the user‟s BT.
- Service Tab : Services in BT device File Transfer Service : Enable File transfer service - When enabled, the File transfer between the user‟s BT and other BT is possible. Authentication - When enabled, only authenticated users can use File Transfer service. Push Service : When enabled, the personal contact information file (Vcard) can be exchanged. Generic Serial : When enabled, other BT can get a Serial connection with the user‟s BT.
▪ When the user can not find the required device on the list, user can click next button to move to device search page. Before searching for devices user can specify the type of a device so that only that type of device can be detected. ▪ When user clicks next button after selecting the device to pair, authentication page comes up. By inserting a correct passkey user can pair with the selected BT device.
BT Manager Setting for BT Favorite / Connection Menu per service that Bluetooth supports. - My Bluetooth Favorites ▪ User can register frequently used BT device for Bluetooth connect into „My Bluetooth Favorites‟. ▪ When the BT device on Favorite List is activated, user can make a connection to it by clicking the device. ▪ By selecting Active Connection on View Menu, user can get an information on current Incoming / Outgoing Connections.
- Generic Serial ▪ User can make a serial connection with other BT device that supports serial communication. ▪ On Bluetooth Serial communication, three ports are supported. - Inbound Port: COM4, Outbound Port: COM4, COM9 ▪ When connecting for Bluetooth Serial communication, user can allocate the com ports for outbound communication. - Set this COM port for the following favorite device : When this option is selected, user can allocate the selected COM Port to one of favorite BT devices.
- ActiveSync Connection ▪ User can establish an ActiveSync connection to Bluetooth PC Device. ▪ User selects ActiveSync Connection on BT Manager. After detecting device and searching service procedure user can make an ActiveSync connection to the selected device. ▪ On PC Device ActiveSync setting should be set to the COM Port which is used for Bluetooth Connection.
▪ Under Services Tap on BT Options menu, user can authenticate the File Transfer Service. (User can set FTP user account and folder to share) ▪ To enable Secure Connection, user needs to disable FTP Service first and then check Secure Connection under Security settings on FTP Server menu.
- Business Card Exchange ▪ Using Bluetooth, user can exchange the personal contact information(Vcard) with other BT Device. ▪ To enable Business Card Exchange Service user needs to enable the Push service under Services tap on Options menu. Before enabling the Push service user should set the My Business Card first under Settings. ▪ To set the Secure Connection on Push Service user should disable the push service first and then check the Secure Connection option under Security Settings.
- LAN Access Connection ▪ User can have an internet access using Bluetooth. To do this, there should be Bluetooth connection established to the BT device that has Internet Service. ▪ When Connecting to LAN Service, user might need to input the User name and Password. If it is not required just click next to continue. - PAN Connection ▪ To have a PAN(Personal Area Network) Service, user needs to have a Bluetooth connection to the BT Device that supports BT PAN Service.
7. How to set up M3 You can set up various configurations of M3 such as date/time. Network, Display,Volume, Power, System, etc. at the control panel. If you press start > setting > control panel, control panel window will appear. On View option in the menu, you can change the view mode into large icons, small icons, or detailed, etc, or to arrange icons.
Regional Settings You can set up region, numbers, currency, time, and date. 1. Select Go to Start> setting > control panel. 2. Open regional setting icon. 3. Select the tap that falls into the category of information to be changed. 4. Select the option you like. Available features are dependent on which region you have chosen in the region tab.
Data/Time Features You are able to set up date, time, standard time zone, watch and alarm. Date/time You can set up standard time zone, year, day and time. The setting method is as follows: 1. Press the downward arrow in the standard time zone until it reaches your location. If the previously set value is appropriate, move on to the following. 2. Select year and month in the calendar. If the current year is not correct, press year and adjust it to be correct.
Alarm You can set the alarm to be informed at a certain time on a certain date. There are 4 alarm events that you can set. On each event, you can assign the time and the date. Following steps explain how to set up the alarm. 1. Please check the check box of one of alarm events. 2. Tap on the desired day of the week (Sunday to Saturday). The first letter of date will be marked with blue color. If you want to select the entire week, check the check box on the right side. 3.
How to make new connection in M3 How to set up high-speed internet with M3 Modem ※ Internet setting is set to the corresponding country as default. User can change the settings using GPRS Setting option on the GSM Phone Program. For detailed manual setting you can refer to the following explanation. 1. Start / Settings / Network and Dial-up Connections or Control Panel / Network and Dial-up Connections.
2. Select make new Connection. Enter the name of connection. check dial-up connection, and press next..
3. Select Hayes Compatible on COM1 4. Press [configure..], and set [Device properties] . Port Settings Tab : Set a Baud Rate to 115200. other data remain as the picture below. Call Options Tab : On Extra settings Enter special modem commands “+CGDCONT=1”,”IP”,”apn_name” then press OK.
5. After done with configuration, input “*99***1#” in the „Phone number‟ edit box and leave all the rest untouched. As last press „Finish‟ button. 6. Now the connection icon would have been generated on the „Network and DialUP Connections‟ Window as the picture below. On the window which pops up by double-clicking on this icon, user needs to input the username and the password, provided by the SIM card or Network provider.
After using Internet, press button from taskbar to disconnect 7. On the internet explorer, select View >Internet Options and under Autodial name on the Connection Tab, you can choose the name which has been generated. If the configuration setting was not correct, the name would not be diaplayed. Now you can use internet just by running Internet Explorer without extra procedure for Dial-Up Connecting.
Internet connecting through desktop PC This connection method is used in “ PC connection” in control panel, and with partnership setting, Internet is available through USB Active Sync. This method is a economical way when user downloads upgrade program or files to PDA while CDMA connection is used. The Setting step is as next. Explore > View> Internet option > connection> Autodial name choose the name [USB@PocketPDA], this option is only available when Desktop PC is online with Internet.
Display You can set the wallpaper image of M3, change the color of background screen, or change the backlight set. If you call the right button menu and select “properties” you can see display properties window. Desktop You can change the desktop image of the background screen. 1. Select the desktop tap. 2. Select an image to use for your background from the image list. The image list shows you image files for in Windows folder. If you want to use images in the other folders, click Search 3.
Volume and Sound You can make a volume adjustment and select the sound to be used. Volume To adjust the volume of the system and set the sound: 1. Select Go to Start>Setting>Control Panel. 2. Open volume and sound icons and select volume tap. 3. Press the left/right arrow icon or move the slide bar to adjust a volume. 4. Click all items to activate the sound such as event (warning, system events), application program, reminder (Alarm, notice). Sound To change the event sound: 1.
User information Enter information such as name, company, address, company phone number, home phone number in the user information tab. To display the owner information on the start screen for system start, click „Show User Information‟ check box. Memo Enter additional user information or other information in the memo box. To show the memo on the initial screen when the system starts, click‟ Show User Information‟ check box. Network ID Windows CE 4.2(CE.
System The system feature window will display information of M3. Here you can see the information on M3 including system, memory, the names of devices, and copyright details. General information contained in the window includes operating system data such as software version, processor, memory, user information, etc. The memory of M3 is used for data storage and programs. Its basic memory capacity is 64MB.You can set the size of the memory cache used for running programs or storing data.
Password You can set up password to keep unauthorized users away from M3. To set up password: 1. Select the password setting tab. 2. Enter the password in the password box. 3. Re-enter the password in the password confirmation box. 4. To enable the password protection when the system starts, click the” Use Password for While System starts” check box. If you touch the screen with a stylus pen so as to input the password in the initial screen, a keyboard will appear.
Internet Settings If you want to use the Internet using Internet Explorer program, carry out the following procedure. General Click the general tap. 1. Enter a webpage which will be started with the activation of Internet Explorer in the start page box. 2. Enter it to Search Engine page box for Internet Explorer search 3. Set up the cache size. 4. To delete the cache in the system, click Clear Cache. 5. To delete the opened web pages click Clear History.
Security Click the security tap to set up security option. 1. To allow cookies, click Cookie check box. 2. Click an appropriate security option among TLS 1.0, SSL 2.0, SSL 3.0, etc. 3. Click “Warn When Switching to Secure and Non-Secure Area”. If you select this option, Internet Explorer will issue a warning when you access to non-secure websites. Premium Click the Premium tab to set up the premium option. 1. To show images in a website, click Picture Display check box. 2.
Storage Manager The storage manager enables you to manage flash ROM(Disk1). In general, Disk1 is used for a space to back up personal organizer management. You can create/eliminate disk partitions or format a disk. Disk1 is installed as one of the basic options. 1. Select the built-in Disk1 from the storage information dropdown list. 2. To format the partitions of the selected disk, click Separate icon and choose Format icon.
Power You can set up to show M3‟s battery status and to be turned off while it is not used for a while. Battery Check out M3 „s battery status. 1. Select Go to Start>Setting>Control Panel. 2. Open the power icon and select the battery tap. The battery tap contains general information on the battery status. 3. There are 3 different battery states as follows: High: Battery power is sufficient. Mid: Battery power is low. It is advisable to charge the battery. Low: Battery power is very low.
How to optimize battery longevity When you work outside office or home, you will especially want your battery to last as long as possible. There are several tips for longer battery life. A. If possible, use external power supplies. If possible, always connect your device to external power supplies using battery charger.
Removal of Programs Remove the installed programs. 1. Select Go to Start>Setting>Control Panel. 2. Open the Program removal icon. 3. Select the program to be deleted from the program list. 4. Click Delete. Note You can only remove those programs installed in RAM. If you cannot delete a program, see detailed information in Windows CE Help in M3 or the program documents. PC Connection You can set up PC connection to synchronize the device with desktop PC or other devices.
8. How to use personal organizer The Pims and Utility in M3 contains SmartMemo, SWRecorder, Today, InfoBox and MSBackup. These programs can be run either individually or simultaneously. Using ActiveSync, you can synchronize information from Microsoft Outlook on PC to InfoBox on M3. At each synchronization ActiveSync compares M3 with PC and updates both M3 and PC to the latest information.
Today To get the Today window as below, select Start > Programs > Pims > Today. Today window displays the summarized information of user‟s day schedule. Today window consists of sound, time, date, schedule, task, user information and manage item. If you click each item, you can view and edit it. The explanation of each icon on Today window is as following: Volume & Sounds property Date Schedule Task Owner : It displays the property of Volume and Sound. : It displays the property of Time and Date.
InfoBox Toolbar Daily View View contacts View task Weekly view Monthly View Schedule (Appointment) - Appointment Input / Edit 1. In order to make a new appointment, tap on„InfoBox‟at the left bottom of InfoBox window or press the desired date for awhile and select „New appointment‟. 2. In order to edit existing appointment, press the desired item from the list for awhile and select „Edit Appointment‟.
3. You can insert Subject, Location, Time, Period, Notify and Status. 4. On the „Note‟, „Ctgry‟and „Attnd‟ tap, you can input a memo, select a category and attendant. 5. When you press on a date on „Appt‟ tap, the calendar window will be displayed so that you can select a date. 6. When you press on a time, you can select from pre-generated time list or you can also input it yourself. 7. On „Note‟ tap, you can input a memo. 8. On „Ctgry‟ tap, you can select, release and edit the category. 9.
- View / Delete Appointment list 1. Once the appointment data is saved, you can view it by pressing the relevant date. 2. To delete the saved appointment, press the desired data from the list for awhile and select „Delete Appointment‟. 3. On the appointment edit window, you can delete it by pressing the icon( ). 4. To delete entire schedule data(including anniversary), select „Delete all‟ from the „InfoBox‟Menu on the left-down side.
Anniversary - Anniversary Input / Edit 1. In order to make a new anniversary, tap on „InfoBox‟ at the left bottom of InfoBox window or press the desired date for awhile and select „New anniversary‟. 2. In order to edit existing anniversary data, press the desired item from the list for awhile and select „Edit Appointment‟. 3. You can insert Subject, Location, Date/Time, Occur, Notify and Status. 4. On the „Note‟, „Ctgry‟and „Attnd‟ tap, you can input a memo, select a category and attendant. 5.
6. On „Note‟ tap, you can input a memo. 7. On „Ctgry‟tap, you can select, release and edit the category. 8. On „Attnd‟tap, you can select the attendant. (Only the contact with email address will be displayed on the attendant list.) 9. To save and exit the Anniversary input/edit window, press the icon( right-up side. - ) on the View / Delete Anniversary list 1. Once the anniversary data is saved, you can view it by pressing the relevant date. 2.
Task - Task Input / Edit 1. In order to make a new task, tap on „InfoBox‟ at the left bottom of InfoBox window or press the desired date for awhile and select „New Task‟. 2. You can also input a new task by pressing the Icon( ) on the tool bar and then press the icon( ) on the left-up side of task list. 3. In order to edit existing task data, press the desired item from the list for awhile and select „Edit Task‟. 4.
6. On „Note‟ tap, you can input a memo. 7. On „Ctgry‟ tap, you can select, release and edit the category. 8. To save and exit the Task input/edit window, press the icon( side. - ) on the right-up View / Delete Task list 1. Once the Task data is saved, all the date within the task period will be marked with dot () on the view screen. 2. To delete the saved Task, press the desired data from the list for awhile and select „Delete Task‟. 3.
Contacts - Contacts Input / Edit 1. In order to make a new contact, tap on „InfoBox‟ at the left bottom of InfoBox window and select „New Contacts‟. 2. You can also input a new contacts by pressing the icon( ) on the tool bar and then press the icon( ) on the left-up side of contact list. 3. In order to edit existing contacts data, press the desired item from the list for awhile and select „Edit Contacts‟. 4.
7. On „Note‟tap, you can input a memo. 8. On „Ctgry‟ tap, you can select, release and edit the category. 9. To save and exit the contacts input/edit window, press the icon( up side.
- View / Delete Contacts list 1. Once the contacts data is saved, the data will be displayed on the contacts list. 2. To delete the saved contacts, press the desired data from the list for awhile and select „Delete Contacts‟. 3. On the contacts edit window, you can delete it by pressing the icon( ). 4. To delete entire contacts data, select „Delete all‟ from the „InfoBox‟ menu on the left-down side.
Daily/Weekly/Monthly View - Toolbar Month display/change Year display/change Anniversary display Display by category Appointment display Return to current date Task display Move page 1. Year display / change - You can change the year by selecting it from the list (if you press „Select Year‟, you can input it yourself.) 2. Month display / change - You can change the month by selecting it from the list. 3.
5. Anniversary display - When this button is pressed, the saved anniversary will be displayed on daily/weekly/monthly list. - When the „down sign‟ beside anniversary icon is pressed, you can view the anniversary data by category. 6. Display by category - When this button is pressed, the appointment, anniversary, task data will be displayer by category on daily/weekly/monthly list. 7.
- Daily view 1. When daily view is selected, the relevant appointment, anniversary and task on that day will be displayed. 2. Appointment, Anniversary and Task will be displayed on the list with white, gray and blue ground respectively. - Weekly view 1. When weekly view is selected, the relevant appointment, anniversary and task on that week will be displayed. 2.
- Monthly view 1. When monthly view is selected, the relevant appointment, anniversary and task on that month will be displayed. 2. If you press the relevant date, Appointment, Anniversary and Task will be displayed on the list with white, gray and blue ground respectively. 3. Appointment, Task and Anniversary will be indicated with number of appointments in red color, icon( ) and black ground respectively on the relevant date.
View contacts - How to sort the contacts list 1. The default way of sorting is by Name. There are four ways in total. These are by All, by Name, by Company and by Categories. - How to view the contacts 1. When the name on the contacts list is pressed, the detailed information of the relevant contacts will be displayed. When telephone number or email address is pressed, the simplified telephone or email information will be displayed.
View task - How to sort the task list 1. The default way of sorting is by category. There are four ways in total. These are by Category, by Status, by Priority and by Dates. - View task 1. When the view task button is pressed, you can see the detailed information of task. The icon( , ) indicates the completion and the icon( , , ) indicates the priority (low,high,normal respectively).
SmartMemo Settings - Category 1. Using menus above the window, you can create, edit and delete the category. 2. Using the left-up menu, you can either create new main category or delete existing main category (by long press of the category name). 3. On each main category (except „No category‟), you can create a sub category using „create‟ menu. - Program Configuration 1.
Memo Menu - Color Change 1. If you press the palette icon( ) on the left-bottom of window, you can change the pen color. 2. You can choose the pen color from the selection on the left and using the right scroll bar, you can adjust the brightness of color. - Change of pen thickness 1. You can adjust the pen thickness using the thickness icon( ).
- Mode Change 1. If you press the left-down pen icon( ), you can choose the mode. , Opaque/Transparent pen , Partial/Total erase Erase current page Delete current page Delete entire memo Save and Exit - Alarm Setting 1. If you press the alarm icon( ) on the right-bottom side, you can set the alarm for the relevant memo. 2. You can check the current time from the alarm menu.
- Page Move / Exit 1. If you press the icon( ) on the right-above side, you can move from page to page.(Maximum 10 pages) 2. The current page you can check with page number on the right-above of page. 3. To save and exit, you can press the icon( ) on the right-above. Writing a Memo / Memo List - How to write a memo 1. On the new memo page, you can write a memo using stylus pen. - Memo List 1. On the memo list, you can check the saved date and the number of pages.
2. You can delete, copy and move the memo by pressing the relevant memo for awhile. SWRecoder Settings - Toolbar Stop Play Record Pause Status Time Option Menu Progress bar Forward, Backward 1. On the toolbar, you can play, stop, record, forward, backward and move. If you press the option menu, you can set the channel and sample rate. 2. High sample rate raises the quality of recording, but it requires bigger file capacity.
- Saving / Sorting 1. You can save the recorded data to My Documents, Flash Disk, SD MMC Card, and CF Card. The data will be saved as „ave‟ file under Voice_Memo folder on the relevant saving path. 2. On the menu left-above, you can select the saving path. 3. You can sort the list by Name, by Date and by size. You can select this on the right-above drop down menu. - Function / List 1. By pressing the record button, you can start the voice recording. 2.
9. How to use application software Calculator M3 offers a calculator application. Using this application you can do a simple calculation. To run the calculator, select Go to start > Programs > Application > Calculator.
Image Viewer You can see the image file using the image viewer. To run the image viewer, select Go to Start> Programs> Application Programs> Image Viewer. The viewer supports various image files such as jpg, gif, bmp, tif, png, etc. Viewer icons and functions Icon Name Open Description Open an image file. Enlarge Enlarge the current image. Reduce Shrink the current image. Full view mode Change into the full view mode.
10. How to use utility programs You can use M3 more conveniently by using utility programs. After selecting Go to Start> Programs> Utilities, you can use a range of utility programs such as Menu setting, backlight, button setting, Qstart, Task manager, Contrast, etc.
Menu Setting (Menus) In the Menu, you can select the programs to be included in the bookmark The installed programs will automatically appear on the program list. Click it to the programme to be added You can see the added item in Start> Programs>Bookmark Backlight If you click the backlight menu in the utility programs, you can select the level of brightness of the screen. Click the radio button to set up the level of brightness.
MS-Backup Backup - How to set the saving location and name. 1. Under the Backup tap On the Backup Manager window, you can assign the saving location to Flash Disk, SD MMC Card and CF Card. 2. In the Name box, you can input the backup name to save with. 3. You can check the latest backup date under the „Last Backup Date‟ box. - How to backup 1. All Data : All the file, registry and Pims data will be backed up except Flash Disk. 2. PIMS Data : Only Pims data will be backed up. 3.
Restore - How to restore 1. Under the Restore tap on the Backup Manager window, you can restore the data by pressing the „Restore Start‟ button after setting the type, Location and the file name to be restored. When the restore is complete, the device will restart automatically. 2. You can delete or restore the backup data by double clicking the relevant file on the list. Quick start (Qstart) You can accelerate the starting process an application program in a specific area by using Qstart.
11. How to use Microsoft application Command Prompt M3 has a window console for pocket CMD. You can use DOS commands using the pocket CMD.
Microsoft Media Player 9 Series It is the Microsoft의 Media player that enable user to enjoy digital music and films. Media player supports four multimedia formats such as ASF, WMA, MP3, and WAV formats. If an audio data does not have any of these formats (ASF, WMA, MP3, WAV), you can change the digital audio data into an appropriate format file via “Microsoft Media Manager” You can copy a multimedia file from desktop PC to M3.
Volume adjustment: Adjust the volume by moving the volume adjustment slider. If you move the slider to the left, the sound will decrease the volume while moving to the left will increase the volume. Track switch: You can select the previous or next track to be played. Internet Explorer Icon: Start Internet Explorer. You can download or Play media play files from websites using the Internet Explorer File Open: Open URLs or multimedia files.
In the Favorites, you can find the list of your favorite streaming media files. In the default mode, the Web Favorite playlist is empty. Web Favorite playlist can be created or edited by the following ways: To create new playlist: 1. Select File > Playlist. 2. If you click the Local Content icon, it will open Organize Playlists. Select this Organize Playlists Menu. 3. Click New and enter the name of new playlist. The default name is “Playlist”. 4. Select the created playlist then click OK. 5.
Favorites: You can quickly play the multimedia files by using the Favorites. Favorites are in the designated playlist. To add a multimedia file or streaming media file in the Favorites: 1. Play multimedia file to add to the Favorites. 2. Select File > Favorites > Add Favorites while the multimedia file is loading. 3. The added file will appear in the Favorites. You can arrange the Favorites. To arrange the Favorites: 1. Select File > Favorites > Organize Favorites. It will bring up the Favorites window.
Web Icon Move on to the Media player‟s website.
You can search the Internet or Intranet using M3‟s pocket Internet Explorer 6.0(Pocket Internet Explorer). To access to ISP or the network, the device has in-built wireless modem. To set up the pocket Internet Explorer, refer to the chapter 6. How to set up M3. You can use the Pocket Internet Explorer in the same way as the one in the desktop PC. Pocket Internet Explorer consists of four parts including Menu bar, address bar, content window, status line.
6. Click the Find Next to initiate search. 7. To cancel the search process, click the Cancel. Work Offline: When you search webpage in the Internet, it will store web pages in the cache in the Temporary Internet Files located at the My Computer. It is faster to browse web pages left in the cache than to go back to the Internet sites. To use cache pages: 1. Before closing the connection, select File > Work Offline. 2. Search the list on the address window to select a webpage you want to see.
Add Favorite: In order to access more easily, add web pages to the Favorite To add the current page to the Favorite: 1. Move on to the page to add. 2. Select Favorite > Add to Favorite. It will bring up the Add Favorite window. 3. Change or leave the page name. 4. To designate the folder you want, click the Create in then select the folder. 5. Click OK, Organize Favorite: Arrange the added pages. To arrange the Favorite: a. Select Favorite > Organize Favorite. It will bring up the Organize Window. b.
Microsoft WordPad You can create or edit a document using Microsoft WordPad. The buttons and Menu are similar to Microsoft Word in desktop PC. Normally, WordPad is saved as pwd file format; you can also save it as an rtf or doc format document. See other menu There are two different menus in Microsoft WordPad: File Menu and Icon Menu. Menu Bar File Create New: Create a new document. You can also make a new document in Template.
Print: Print the current document. To use the print function, connect M3 to a desktop PC and set up printer. Recent document: Show documents that you have opened recently. Close: Finish the WordPad and close the program. Edit Undo: Cancel the last operation Redo: Carry out the last operation again. You can use if after using Undo command. Cut: Cut the selected text or object. Copy: Copy the selected text or object. Paste: Paste the cut or copied text or object.
Font size change Font type change How to convert the document type If the device received email with the attachment of Word document or templates created in Word 6.0 or higher when there is an email program such as InBox installed in M3, WordPad will convert the file in order to open it in M3. To convert the document, open the attachment in the email program or open the file in WordPad. Then it will automatically execute the conversion process.
Windows Explorer Microsoft‟s Windows Explorer will operate in M3 in the same manner it does in PC. Reference: If you enter URL in the address bar, you can access to the Internet. File Menu File Edit Open: open the selected folder or file. New folder: create a new folder in the current folder. Delete: Delete the selected folder or file. If you click and drag or select them through SHIFT key, you can delete multifold items at the same time.
View Paste: Paste the cut or copied folder/file in the current folder. Shortcut Paste: Create a hot key for cut or copied folder/file. Select All: Select all files and folders in the current file. Address bar: Display an address bar in Windows explorer. Large icon: Display folders or files in large icons. Small icon: Display folders or files in small icons. Details: Show the details of folders and files such as name, size, format, last modification date, etc.
Appendix A Product Specification The following is the specification of hardware and devices. Specification OS Windows CE.NET 4.2(CE.
Troubleshooting This chapter provides tips to efficiently use M3 and ways to solve malfunction problems. In particular, it will deal with the following problems.
Battery power The following are steps to prevent an unexpected system failure in M3 due to power. When you use M3 for the When you purchase M3, there are occasions that the first time battery is discharged. Thus use M3 after charging up the battery with the charger. When you charge Battery When you charge a battery, be sure to check out the connection between the charger and M3 and between the charger and outlet. When an Exhausted Battery Charge the battery with charger.
blocked) a hardware reset. To do a hardware rest, you have to press and hold the reset button on the button of M3 for more than 4 seconds. Then M3‟s battery power will be blocked, thereby cutting off the power of M3. If you briefly click the reset button, it will connect battery power and proceed with the hardware reset. Hardware reset results in the lost of all files and data. So it is advisable to do regular backup of data and files in M3 in a desktop PC and flash ROM.
If M3‟s program memory is not sufficient, it can slow down the speed. Click Go to Start> Settings> Control Penal> System, then expand the program memory area with the slider in the memory tab. If storage memory area occupies too much space, backup programs in the storage area to PC so as to empty the space. Then expand the program memory area. When M3 is not turned When the battery is completely discharged, the power of M3 on even if it is connected can be turned off automatically.
Too small text size Date/Time Settings in left and right directions. Sometimes it is hard to read a text when running MS WordPad or Internet Explorer. In WordPad, click View Menu bar> Zoom/Focus then select the size that you want. In Internet Explorer, you can select the size after clicking View Menu bar> Text Size. If you click GO to Start > Settings > Control Panel> Date/Time program, you can efficiently manage time.
Data/File Backup Data/File Backup Sometimes you have to conduct a hardware reset due to unexpected problems. Thus you should backup data/files to desktop PC and flash ROM. To backup data/files in a desktop PC, connect M3 to PC. For detailed information on the connection methods, refer to the chapter 4. How to connect to Desktop PC. Using ActiveSync explorer or the Copy/Paste Menu in a desktop PC‟s Windows explorer, you can copy M3 data/files to the backup folder (created by the user) in a desktop PC.
Synchronization with PC When the connection USB cable is not in connection with a desktop PC or is not with desktop PC does connected properly. Check out if the USB cable and the USB not happen. port of desktop PC is properly connected. Check out if the USB cable is properly inserted to the USB port of M3. ActiveSync option is not properly set up. Check out the setting. For detailed information, refer to the Help of the desktop ActiveSync.
Infrared (IrDA) Communication When Infrared(IrDA) Arrange M3 and the IrDA ports of other devices. The communication does not distance should be no more than 1m. operate Remove obstacles that can possibly block the communication between M3 and other devices. Check out if M3 has IrDA OBEX communication protocol installed. Without it, M3 cannot make a communication. When a disconnection takes Communication can be interrupted while transmitting a place while transmitting files large size file.
Glossary Backup. A copy or copies of data stored in M3 file, desktop PC, CompactFlash card or other safe storage files. Battery charger. Supply external power suitable for operating M3 by switching the AC power of standard household outlet to low power DC power. DHCP (Dynamic Host Configuration Protocol). Protocol that assigns a floating IP address to M3 whenever it is connected to the Network. Dial-up connection.
write. Data stored in RAM will be kept while the power is on. Remote connection. Connection between M3 and remote computer or server. Reset. The process of restarting M3 and initialize the OS again. When the user carries out Reset, the data in opened files will be lost. However, data that has already been saved will be restored. Restore. The step of recovering the user‟s device to the state of its last backup. It includes a copying of backup data in M3. ROM (read-only memory).
