User guide

114
OS Update via USB Downloader
NOTE
Driver installation only needs to be done for the first time.
I. Driver Installation
1. Download all necessary files to your PC.
① OS file.
② USB Update tool:
M3SMART_USBDown.zip
③ USB Driver if necessary:
M3SMART_Driver.zip
2. Turn off the device by pressing the power button for approximately 10 seconds.
Then, while pressing the right arrow button, press power button to enter boot menu.
[BOOT MENU 1.0.2]
1) SD Download
2) USB Download
3) Clean Boot
4) Factory Reset
5) Device ID(UUID)
6) Debug Serial:[NO]
7) ALL Format
Select Number
0) Exit:Launch OS image
SAMSUNG-S5PC100 833MHz
RAM 256MB / ROM 1GB
3. From the boot menu, press ‘2’ to enter USB Download Mode. Then, press ‘1’ to prepare the PDA for
USB OS update.
[ USB Download Mode ]
USB Download Ready..
Please Send Image File
0) Power Off
When it displays USB Download Ready, connect the PDA to
the PC.
4. Place M3 SMART on the cradle and connect to a PC via USB cable. ‘Found New Hardware’
message will be displayed on your PC and will automatically install required driver.
If the driver is installed properly, please go to step 11, otherwise proceed to step 5.