User guide

129
GPRS Settings
To use GPRS, must enter required information such as APN (Access point name), username and password
information which is provided by the operator.
There are 4 ways of configuring GPRS connection:
1.
Using WM Connections setting wizard (manual configuration)
2.
Using WWAN Manager (semi-auto configuration)
3.
Using StartUp.inf included in StartUp folder of M3 flash disk files and operator’s .ini file (auto configuration)
4.
Using XML (auto configuration)
1. GPRS Configuration using WM Wizard
To configure GPRS connection, follow the steps described below.
1. Click [Start]

[Settings]
2. Click [Connections]
3. Click ‘Add a new modem connection’ either in ‘My
ISP’ or ‘My Work Network’.
4. Assign a unique name for the connection and
select ‘Cellular Line (GPRS)’ from the drop down
menu. Then, click ‘Next’
5. Enter ‘Access point name’ that is provided by the
operator. Then, click ‘Next’.
6. Enter Username and password that are also
provided by the operator. Then, click ‘Finish’.