User guide

133

CSD_USER_PW=

If you have the .ini file, copy the file to \Flash Disk \Driver. Then, add the following code in the StartUp.inf

which is included in the StartUp folder of M3 flash disk files.

//GPRS Connection

CopyFile=/S "\Flash Disk\Driver\Country.ini" "\Windows\Provider\Country.ini"

sleep=500

RunExe= /S "\Windows\WWAN_Manager.exe" "Country,Country_Operator "

RegSetValue=/s dword

[HKEY_LOCAL_MACHINE\Software\Microsoft\RIL]SetGPRSAuthentication:2

RunExe =/s "\Windows\WWAN_Manager.exe" "1,Country,Country_Operator"

Note: In the code, Country.ini, Country_Operator and Country are arbitrary examples. You should change it

appropriately. In the last line of code, '1' will create the connection profile in My Work Network and '0' will

create the connection profile in My ISP.

For operators included in WWAN Manger, corresponding .ini file is already included in \Windows \Provider

folder. Hence, CopyFile command is not required.

Here is an example code.

//GPRS Connection

CopyFile=/S "\Flash Disk\Driver\Korea(South).ini"

"\Windows\Provider\Korea(South).ini"

sleep=500

RunExe= /S "\Windows\WWAN_Manager.exe" "Korea,Korea(South)_KTF "

RegSetValue=/s dword

[HKEY_LOCAL_MACHINE\Software\Microsoft\RIL]SetGPRSAuthentication:2

RunExe =/s "\Windows\WWAN_Manager.exe" "0,Korea,Korea(South)_KTF"

Finally, open M3.ini file which is also included in StartUp folder of the flash disk files. Then, set install value of

1 of [GPRS_INSTALL].

[GPRS_INSTALL]

Install=1

InstallFile=\Flash Disk\Driver\WWAN_Manager.CAB

Save the changed in StartUp.inf and M3.ini file then copy back to the device followed by reset.

4. Using XML

To use auto configuration using xml, GPRS.xml file is required. Here is an example of GPRS.xml.

Note that you must set [SET_GPRS], [GPRS_INSTALL] should set to 1 in M3.ini

In the XML file, you can set Connection Name, UserName, Password, APN as below.

<wap-provisioningdoc>