User guide

154
Installation/Launching from Storage Card
Cab file Auto Installation from Storage Card
Automatically installing Cab files after soft/hard reset can be done through M3.ini.
In M3.ini, [CAB_INSTALL] section indicates whether one or more cab files are automatically installed or not.
It supports up to 100 cab files. For more information, please see StartUp > SKY, MM3 > M3.ini and
StartUp.inf Guide.
Please refer to below linked Application manual.
Link :
Application manual
When a cab file is installed using M3.ini, the program will be installed on the Device. Install location selection
is not provided. Therefore, installing a program to Flash Disk or Storage Card is not possible.
Launching a Program when Storage Card is inserted
Automatically launching a program when a storage card is inserted can be done by creating a well know
folder called ‘2577 ’(MCStart folder for Windows CE).
First, 2577 folder must be created at the root folder of the storage card.
Then, Autorun.exe file that executes the necessary files must be located in the 2577 folder.
‘M3ScanTest’ program is used as an example in this document.
As soon as SD card is inserted in SD card slot, below screen will be showed up.
Note: 2577 is a system folder so that the folder is
hidden.