User guide

156
Memory Size Change (M3 SKY, MM3)
User can change the increase the device memory by reducing Flash Disk storage or decrease the device
memory by increasing the Flash Disk storage.
This can be done simply by using
ReformatUtil.exe.
Follow the steps below to change the memory size.
1. Download and copy the file in to the PDA.
2. Run ReformatUtil.exe on the device. When a warning message pops up, click ‘Yes’ to proceed.
3. Change the Flash Disk Size as required and click on APPLY button. The maximum Flash Disk size
is limited by the ROM size.
ROM Size
128MB
256MB
Default Flash Size
20MB
140MB
Max. Flash Size
30MB
160MB
Please refer to FAQ section 13.C.Memory Allocation for more details
on memory allocations.
4. On the following warning screen press ‘1’ keypad to proceed.
[SELECT]
All contents will be lost.
Continue?
0. NO / 1. YES
5. When a reset message appears, press ‘0’ keypad to reset the device.
[RESET DEVICE]
Re-Formatting done.
Reset Device!!
0. RESET
Note that the storage capacity will return to its factory default configuration if ‘Format All’ is performed from
boot menu.