User guide

173
User Power Mode(LCD, Touch and keypad disable instead of sleep mode)
M3 Green and T
Modify registry by using M3.ini as below.
Example for M3T
// Type - 0:MC6300S, 1:MC6400S, 2:MC6500S, 3:MC6100S, 4:MC6700S, 5:MC8800S
// Scanner - 0:Opticon Scanner, 1:Symbol scanner, 2: Intermec scanner, 3: HHP Scanner
// Display OFF Mode(M3Green Only) -0:Default, 1: shot(sleep), long(display off), 2: shot(display off), long(sleep)
[DEVICE_TYPE]
Type=4
Scanner=0
LCDMode=2
M3 Orange and MM3
Please copy
OrangeUPM and unzip on you PC firstly.(Based on English ver. OS)
i. ORANGE_UPM_20130116.zip contains mc_upm.dll, zylonite_pwrbutton.dll, zylonite_keypad_Us.dll,
touch.dll, UPM_bug.exe and UPMControl.exe.
ii. Please copy the All files to Flash Disk folder and Run UPM_Patch.exe then ‘Please reset’ message
showed up, perform the soft-reset.
iii. Run the UPMControl.exe file on the device.
iv. Depending on the OS type of language, the ‘zylonite_keypad_xx.dll’ file needs to be replaced.
(
Language pack)
This file could be copied on Windows XP based.
If having any trouble with this, please request on
itc page.