User guide

31
3. Launch AGManager program and select COM2 then click OPEN button. It will start gathering GPS data.
If you get the fixed satellites more than 4, you can get the position by latitude and longitude.
And there are three types of GPS reset - cold, warm and hot. Reset means re-positioning of its location.
 Cold reset: A condition in which the GPS receiver can arrive at a navigation solution without initial
position, time, and current Ephemeris.
 Warm reset: Start mode of the GPS receiver when current position, clock offset, and approximate
GPS time are input by the user. Ephemeris data is not available.
 Hot reset: Start mode of the GPS receiver when current position, clock offset, approximate GPS
time, and current ephemeris data are all available.
* Note: Sometimes when internal battery is dead PDA with Sirf III module, default setting of NMEA Protocol
changes to Sirf Binary Protocol, if GPS is suddenly not working, please change this setting back to NMEA
using AG Manager.