User guide

4. From the Key Setting Window, those 8 (Alphanumeric keypad) or 15 keys (QWERTY keypad) can be

customized.

Note that depending on the PDA option, it may appear differently.

(WM6.1, HSDPA) (WM5.0, non-GSM) (QWERTY, WM6.1, HSDPA)

You can assign the following functions to the keys. All keys have the same customization options. Note that

‘Yellow’ and ‘Blue’ keys have ‘VK_F14’ as the default value.

Default

Default value of the keys

VK_ESCAPE

Virtual key for escape.

VK_F13

Virtual key for F13 (user can assign a function to F13)

VK_F14

Virtual key for F14 (F14 is used to scan when ScanEmul is running)

VK_F17

Virtual key for F17 (user can assign a function to F17)

VK_F18

Virtual key for F18 (user can assign a function to F18)

VK_SPACE

Virtual key for space

VK_RETURN

Virtual key for return

SIP ON/OFF

Toggles soft input panel

Application 1

Application 2

Windows

Windows key

Home

Home key

PgUp

Page Up key

End

End key

PgDn

Page Down key

2. Using VisualINI

To use VisualINI, first you need to install it. To install manually, you can click VisualINI.CAB in Driver folder

of Flash Disk or to install automatically after reset, set install value of [VISUALINI_INSTALL] to 1 in m3.ini file.

If VisualINI is installed, you can find StartUp icon at [Start] -> [Settings] -> [Systems] as shown in figure 2.1.