User guide

71
<Alpha-numeric>
<QWERTY>
All keys shown above can be set to one of the following.
0
Default
Default value of the keys
1
VK_ESCAPE
Virtual key for escape
2
VK_F13
Virtual key for F13
3
VK_F14
Virtual key for F14
4
VK_F17
Virtual key for F17
5
VK_F18
Virtual key for F18
6
VK_SPACE
Virtual key for space
7
VK_RETURN
Virtual key for return
8
SIP ON/OFF
Toggles soft input panel
9
Application 1
User defined application1
10
Application 2
User defined application2
11
Windows
Windows key
12
Home
Home key
13
PgUp
Page Up key
14
End
End key
15
PgDn
Page Down key
16
Disable
Disable the button
17
VK_ACTION
Virtual key for Action
18
. (PERIOD)
Dot or full stop
19
, (COMMA)
Comma
When ‘Only Use Send/End Key’ option is checked in QWERTY device, it will not function as window or OK
on ORANGE layer input mode. In other words, + ( or ) do not act as or .
User can customize the keys as required follow by OK button at the top right corner.
2. M3.INI Method
By editing M3.INI file, you can customize the keys as well. M3.INI is located in the StartUp folder in the Flash
Disk of the Device. To edit the file, you may require copying the file to your PC.
If you open M3.INI file, you will find the following section:
M3Orange