User guide

90
8. Select [2. Format All] and press return button.
'Format all partitions Confirm it' message will be displayed.
9. Select [1. Yes]
'Format completed Update boot and OS' message will be displayed.
Then, select [0. BACK] to enter Main MBoot MENU.
10. From the main boot menu, select [1. Update] -> [1. SD Update] -> [3. SPLASH Update].
SPLASH update will update the image that is displayed when booting.
To use your own image, you should have 240 x 320 pixel 24 bit bitmap file and save it as
SPLASH.bmp.
After successful update, return to the update menu.
11. Select [2. BOOT Update] N.B. We strongly recommend updating BOOT prior to OS update. 'BOOT.
NB0 Write done' message will be displayed.
Then, turn off the terminal again and re-enter the boot menu.
12. Select [1. Update] -> [1. SD Update] -> [1. OS Update] from the update menu.
'Writing done. Reset Device!!' message will be displayed.
Then, finish OS update by resetting the device.
[Format All] process will remove the previous Flash Disk files. To copy the flash disk files back to the PDA,
you can either use SD card or ActiveSync (via USB).