User's Manual

l To set the GPS
– Tap the ‘Start > Settings > System Tab > GPS’ and then you can set the information related to the GPS.
– You don’t have to set additional information when there is a single program which uses GPS data. When
there are more than one program which use GPS data, you need to set the program port and hardware
port required for each program.
73
Usage of Device
To use the GPS (1)
Select the GPS on the System Tab.
Set the GPS Program Port which
is not yet used.
Set the Hardware port of the device.
GPS hardware port for M3 sky is
COM2 and with baud rate of 9600.
GPS is optional. GPS feature is not available on the unit with no GPS module integrated.