Users Manual

AP hotspot configuration WiFi
1. Press and hold the power button on the left to turn on the machine. If WiFi is not
configured, the system will automatically enter the network configuration mode
when it is turned on for the first time. Suppose you want to re-enter the network
configuration mode after running other programs, you can refer to the operation
below. After the UIFlow Logo appears at startup, quickly click the Home button
(center M5 button) to enter the configuration page. Press the button on the right
side of the fuselage to switch the option to Setting, and press the Home button to
confirm. Press the right button to switch the option to WiFi Setting, press the Home
button to confirm, and start the configuration.
2. After successfully connecting to the hotspot with your mobile phone, open the
mobile phone browser to scan the QR code on the screen or directly access
192.168.4.1, enter the page to fill in your personal WIFI information, and click
Configure to record your WiFi information. The device will restart automatically after
successfully configuring and enter programming mode.
Note: Special characters such as "space" are not allowed in the
configured WiFi information.
Network Programming Mode and API KEY
Enter network programming mode