Datasheet

Module STEPMOTOR

Description

Product Features

9-24V Power Input

3-way stepper motors (X, Y, Z)

Product Size：54.2mm x 54.2mm x 12.8mm

Product weight：23.5g

Include

1x Step Motor Module

12V Power (Optional)

1x 5V FAN Module for heat dissipation (Optional)

Applications

DIY 3D Printer

Simple Robot Arm

M5Stack Docs

STEPMOTOR is used for stepper motor control. It is perfect for any motion project as it can drive up to 3

Stepper motors with GRBL control.

It is built with MEGA328P has been flashed GRBL firmware. The module comunicates with M5Core via

I2C(0x70)

Integrated 3 DRV8825, a simple but very powerful board that can control one bipolar stepper motor at

the time and allows micro stepping up to 1/32 of a step.

PAGE 1
M5Stack Docs Module STEPMOTOR Description STEPMOTOR is used for stepper motor control. It is perfect for any motion project as it can drive up to 3 Stepper motors with GRBL control. It is built with MEGA328P has been flashed GRBL firmware. The module comunicates with M5Core via I2C(0x70) Integrated 3 DRV8825, a simple but very powerful board that can control one bipolar stepper motor at the time and allows micro stepping up to 1/32 of a step.
PAGE 2
M5Stack Docs DRV882 The Firmware of inside MEGA328 5 Datasheet EasyLoader 1.EasyLoader is a simple and fast program burner. Every product page in EasyLoader provides a product-related case program. It can be burned to the master through simple steps, and a series of function verification can be performed.(Currently EasyLoader is only available for Windows OS) 2.
PAGE 3
M5Stack/*Docs If Button A was pressed, stepmotor will rotate back and forth at a time */ #include #include #define STEPMOTOR_I2C_ADDR 0x70 // initialization M5.begin(); Wire.begin(); // Controlling Protocol: // G XYZ F SendCommand(STEPMOTOR_I2C_ADDR, "G1 X20Y20Z20 F500"); SendCommand(STEPMOTOR_I2C_ADDR, "G1 X0Y0Z0 F400"); // Get Data from Module. Wire.requestFrom(STEPMOTOR_I2C_ADDR, 1); if (Wire.available() > 0) { int u = Wire.
PAGE 4
M5Stack Docs