Technical information

41
computer, outputs to the piezo might be at random values
(up to +/- 220V).
•
••
• Do not unplug cables to / from energized hardware.
Turn OFF first.
•
••
• Do not insert a conducting object into the phase
extender box while it is energized (e.g. screwdriver).
•
••
• When closing the System.par file after viewing, if you
are asked to SAVE CHANGES, be sure to say NO.
VII. ENGAGEMENT / IMAGING
•
••
• Never attempt to manually engage using the course
adjustment screws.
•
••
• Ensure engagement settings never exceed safety limits
•
••
• Never move or adjust the AFM head while imaging or
taking force curves.