EQ4M 6-Band Dual Channel Mastering EQ User Guide www.maagaudio.
EQ4M™ 6-Band Dual Channel Mastering EQ Model: EQ4M www.maagaudio.com IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions 2. Keep these instructions 3. Heed all warnings 4. Follow all instructions 5. Clean only with dry cloth 6. Do not block any ventilation openings. 7. Install in accordance with the manufacturer’s instructions 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat 9.
EQ4M™ 6-Band Dual Channel Mastering EQ Model: EQ4M www.maagaudio.com INTRODUCTION The Maag Audio EQ4M™ is a 6-Band Dual Channel Mastering EQ with AIR BAND® (shelf boost from 2.5 to 40kHz), a true in/out bypass, a transparent INPUT ATTN (attenuator), and stepped (detent) controls. In 1993, Cliff Maag first introduced the AIR BAND® to the audio world in the NTI EQ3. The EQ3 was a dual channel 6-Band EQ powered in a 19 inch rack and to this day is hailed as one of the most musical equalizers ever made.
EQ4M™ 6-Band Dual Channel Mastering EQ Model: EQ4M www.maagaudio.com CONTROLS PEAK Red LED starts to illuminate when the output signal reaches 23 dBu AIR BAND® Boost only shelf at 2.5 kHz, 5 kHz, 10 kHz, 15 kHz, 20 kHz, and 40 kHz. The frequencies below the shelf peaks are also affected due to the transitional slope. SIGNAL Green LED indicates audio signal presence. Illumination starts @ -20 dBu GAIN Gain control for the AIR BAND (+15 dB max gain) SUB (10 Hz) Fixed boost and cut bell (+15 dB, -4.
EQ4M™ 6-Band Dual Channel Mastering EQ Model: EQ4M www.maagaudio.com Specifications Specification Value Specification Value Frequency Response -2dB points, 10Hz & 75kHz Headroom +29 dBu @ 10 K Ohms +28.5 dBu @ 600 Ohms Nominal Input Impedance (XLR) 48 K Ohms, balanced Nominal Output Impedance (XLR) 50 Ohms, balanced *Specifications subject to change without notice. Product Warranty Maag Audio expressly warrants its products for a period of one (1) year from the date of purchase.
