Installation Guide

18
Quick tip 
Apply masking tape on both sides
of the joint where you will run a
bead of silicone. Apply the silicone,
smooth with a wet fi nger then
remove the masking tape.
Check me!
Apply a bead of silicone all along the wall to wall and
wall to base joints. For a smooth fi nish you can remove
the silicone excess with a damp rag or wet fi nger.
9
STEP Silicone
All faucets installed on the walls
must be sealed with silicone.
Remove protective fi lm from walls
Apply silicone in the previously drilled holes on the side
and back walls. Apply silicone to the rear of the shelf
brackets (6).
Fasten the brackets in place using the screws (7).
10
STEP Glass shelf installation
7
6
6
10.1
Check me!
When installing the faucet
faceplate or any other
component, be sure to
silicone the outer edge.