Installation Instructions

Install the Towel Bar and Towel Bar Brackets to the middle of one of the

Glass Panel Doors as shown using the #8 x 3/8” Flat Head Screws

provided. This is now called the Outer Glass Panel Door.

Note: If your Towel Bar Brackets have only ONE countersunk screw

hole, install the Bracket to the Glass Panel Door with the #8 x 1/4” long

Pan Head screw provided as shown below.

Install the Door Handle to the middle of the second Glass Panel

Door as shown using the #8 x 3/8” Flat Head Screws provided.

This is now called the Inner Glass Panel Door.

ACTUAL SIZE #8 X 1/4” LONG

PAN HEAD SCREW

ACTUAL SIZE #8 X 3/8” LONG

FLAT HEAD SCREW

SKETCH 10A

Apply Silicone Sealant as shown in SKETCH 10A.

Apply to all “seams” created by the Walls / Wall Channels, Track, Track / End Guides,

and all around the Center Guide as noted in Step #9.

SILICONE SEALANT