Installation Guide

ManualsBrandsMAAX ManualsBathtubs105463-108-001-000

SAVE THIS GUIDE FOR FUTURE REFERENCE.

CONSERVER POUR UN USAGE ULTÉRIEUR.

Read all instructions carefully before proceeding.

Lire toutes les instructions attentivement avant de commencer

l’installation.

Serial number • Numéro de série

IMPORTANT • Record the serial number

IMPORTANT • Noter le numéro de série

A two person installation is recommended.

Une installation par deux

personnes est recommandé.

INSTALLATION INSTRUCTIONS

GUIDE D’INSTALLATION

FREESTANDING BATHTUB

BAIGNOIRE AUTOPORTANTE

MODEL • MODÈLE

103901 • 103903 • 105463 • 105465 • 105516 • 105797 • 105798 • 106150 • 106151

106192 • 106193 • 106426

1 2

1. F² Drain video (english)

2. Vidéo pour F² Drain (français)

View F² Drain Video - Scan QR

code with a mobile device

Voir Vidéo de F² Drain - Balayer QR

code avec un dispositif mobile

Ver video de F² Drain - Escanear

código QR con un dispositivo mobil

Summary of content (20 pages)

PAGE 1
View F² Drain Video - Scan QR code with a mobile device 2 Voir Vidéo de F² Drain - Balayer QR code avec un dispositif mobile Ver video de F² Drain - Escanear código QR con un dispositivo mobil 1. F² Drain video (english) 2.
PAGE 2
Table of contents: Page Before you begin.................................................................................................................3 Tools and supplies...............................................................................................................4 1. Unpacking the unit...........................................................................................................5 2. Leveling legs adjustment............................................................
PAGE 3
If the optional F² Drain kit was purchased, please refer to 10032746 installation guide before installing the bathtub Si l’ensemble optionnal F² Drain a été acheté, s’il vous plaît se référer au guide d’installation 10032746 avant d’installer la baignoire BEFORE YOU BEGIN • Carefully read the all the instructions in the manual before beginning the installation. • Consult local building codes to make sure the installation complies with standards. • Remove the unit from its packaging.
PAGE 4
TOOLS OUTILS REQUIRED REQUIS ⅛" -drill bit Mèche de ⅛ po.
PAGE 5
Follow all instructions and check them off as you go. Suivre toutes les instructions et les cocher lorsqu'elles sont terminées. STEP ÉTAPE 1 Unpacking the unit Déballage de l'unité Cut the cardboard box so as to keep one side to protect the bathtub while is upside down. Turn the bathtub upside down. Unscrew the skirt from the wooden blocks. 1.1 Check me! Cochez-moi! Découper la boite de carton de façon a garder un coté pour protéger le bain et mettre la baignoire à l'envers dessus.
PAGE 6
STEP ÉTAPE 2 Leveling legs adjustment Ajustement des pattes ajustables Place back the skirt in the inverted bathtub. Adjust the legs so that they exceed the top of the edge of the skirt by 1/8". You can use a 2x4 to take the measure as shown. Skirt Jupe Remettre la jupe dans la baignoire inversée. Ajuster les pieds de sorte qu'ils dépassent le haut du bord de la jupe de 1/8 po. Vous pouvez utiliser un 2x4 pour prendre la mesure comme indiqué. 2x4 ⅛" 2.
PAGE 7
STEP ÉTAPE 3 Bathtub skirt and drain positioning Positionnement de la jupe de la baignoire et du drain With the help of the bathtub apron or the optional template, mark the center of the drainage line in relation with the desired position of the bathtub. See also the rough-in information for your model on our website. 3.1 Check me! Cochez-moi! À l'aide du tablier de la baignoire ou du gabarit optionnel, identifier le centre de la ligne de drainage par rapport à la position désirée de la baignoire.
PAGE 8
STEP ÉTAPE 4 Installing faucets (NOT INCLUDED) Installation de la robinetterie (NON INCLUSE) Faucet elements must be installed in the intended area. See also the rough-in information for your model on our website. Before drilling, position the faucet base to make sure they line up with the predrilled holes. Mark the location of the faucets on the unit and drill 3/16" (5 mm) pilot holes. Make sure the holes line up with the plumbing. 4.
PAGE 9
STEP ÉTAPE 5 Bathtub preparation and installation Preparation et installation de la baignoire Install the waste and overflow and faucets according to the manufacturer's instruction manuals. Installer le trop plein et les robinets en suivant le guide d'installation du manufacturier. 5.1 Check me! Cochez-moi! Install the valves and faucets at this stage. Installer la robinetterie à cette étape.
PAGE 10
STEP ÉTAPE 5 Bathtub preparation and installation (cont'd) Preparation et installation de la baignoire (suite) For models 105463 (Reverie F) and Serenade (105516) 105465 (Romance F) and Serenade (105516) ONLY: Pour les modèles 105463 (Reverie F),105465 (Romance F) et Serenade (105516) SEULEMENT: We recommend using a flexible drainpipe #10025755-XXX for an optimum installation. Consult local plumbing and building codes to assure this waste and overflow meets your local regulations.
PAGE 11
STEP ÉTAPE 5 Bathtub preparation and installation (cont'd) Preparation et installation de la baignoire (suite) For models 105463 (Reverie F),105465 (Romance F) and Serenade F (105516) EQUIPPED WITH A BLOWER ONLY: Pour les modèles 105463 (Reverie F), 105465 (Romance F) et Serenade F (105516) ÉQUIPÉS AVEC UN SOUFFLEUR SEULEMENT: Using the bathtub apron, trace the required lines and make the required openings in the floor, without exceeding the apron; •AEROSENS system bathtub: make an opening in the floor t
PAGE 12
STEP ÉTAPE 5 Bathtub preparation and installation (cont'd) Preparation et installation de la baignoire (suite) Apply a silicone seal under the apron (optional). According to bathroom flooring, use proper screws (not included) to secure the skirt to the floor. 5.2 Check me! Cochez-moi! Appliquer un joint de silicone sous la jupe (facultatif). Dépendant de la finition du plancher utiliser des vis appropiées (non fournies) Make sure the skirt is level. S’assurer que la jupe est de niveau.
PAGE 13
STEP ÉTAPE 5 Bathtub preparation and installation (cont'd) Preparation et installation de la baignoire (suite) Remove the spacers. Make sure all the legs are in contact with the ground, so that the bathtub is not supported by the skirt (see cut view below). The bathtub must be tested before installation is complete. Fill the bathtub to the overflow and inspect for leaks. Tighten and loose connections between the hoses and motor by hand. 5.4 Check me! Cochez-moi! Enlever les espaceurs.
PAGE 14
PAGE 15
PAGE 16
PAGE 17
TOUBLESHOOTING Water accumulates around the drain and the bathtub does not completely empty. • Check that the installation is leveled and that the bathtub is well supported by the legs. With the help of level, place at the bottom of the bathtub, make sure to have a slight slope towards the drain. If necessary, adjust the legs under the bathtub. Bottom of bathtub moves during use. • Bathtub is not sitting firmly on its base; adjust leveling legs. Polyethylene film will not come off.
PAGE 18
LIMITED WARRANTY GARANTIE LIMITÉE GARANTÍA LIMITADA MAAX Bath Inc. (hereafter “MAAX”) offers the following express limited warranty on each of its products. This warranty extends only to the original owner/end-user for personal household use. For commercial uses, additional limitations apply. MAAX Bath Inc. (ci-après « MAAX ») offre la garantie limitée expresse suivante sur chacun de ses produits. Cette garantie s’adresse uniquement au propriétaire/utilisateur initial pour un usage personnel domestique.
PAGE 19
available, all expenses to provide said access will be the responsibility of the owner/end-user. produit tel que le décrit le guide d’installation afin que MAAX puisse exécuter la garantie spécifiée aux présentes. Si un tel accès n’existe pas, tous les coûts inhérents à son aménagement seront la responsabilité du propriétaire/utilisateur. el manual de instalación, con el fin de que MAAX pueda cumplir con la garantía que se indica en este documento.
PAGE 20
user has informed an authorized MAAX Agent or Warranty Service Department representative of the nature of the problem during the warranty period; (3) conclusive evidence (e.g.