Installation Guide

8
If needed use wood shims between the studs and the
fastening fl ange to maintain centered position of base.
FOR OLYMPIA BASES DO NOT USE SHIMS UNDER
THE BASE TO LEVEL!
DOING SO WILL VOID THE MAAX WARRANTY!
13
With a 1/8" bit, drill holes in the fastening fl ange then
secure the base to all the wall studs with #8 x 1¾ "
screws (not included). Only pre-drill the flange not
the studs.
HAND TIGHTEN ONLY !
THE BOTTOM OF ALL HOLES IN THE FLANGE
HAVE TO BE AT LEAST 8MM (0.3 INCHES) ABOVE
THE BASE THRESHOLD!
CUT SHIM EXCESS
13
2
STEP Installing the base (cont'd)
Olympia
2.4
Check me!
2.5
Check me!
Ø 1/8"
0.3" (8 mm)
Fastening fl ange
COMPATIBLE BASES No.
Olympia square 4832 106011
Olympia square 6032 106012
13
Leveling the base is critical
for wall alignment
Verify that the base is completely level on all sides.
Confi rm that the drain pipe is centered. We recommend
that a plumber completes the drain pipe connection.
2.3
Check me!