Installation Guide

8
If needed use wood shims between the studs and
the fastening fl ange to maintain centered position of
bathtub.
DO NOT USE SHIMS UNDER THE BATHTUB TO
LEVEL!
DOING SO WILL VOID THE MAAX WARRANTY!
13
With a 1/8" bit, drill holes in the bathtub fastening
fl ange then secure the bathtub to all the wall studs
with #8 x 1¾ " screws (not included). Only pre-drill
the flange not the studs.
HAND TIGHTEN ONLY !
CUT SHIM EXCESS
13
2
STEP Installing the bathtub (cont'd)
2.4
Check me!
2.5
Check me!
Ø 1/8"
Fastening fl ange