Installation Guide

15
Install the side wall (15). Lift the wall approximately
3 inches above the threshold of the base, push it
completely against the back wall then slide the side
wall into position.
WIPE OFF EXCESS SILICONE
3
1
Side wall
Back wall
7
STEP Final installation of side wall
7.1
Check me!
7.2
Check me!
Secure the wall to the wall studs with #8 x 1¾ "
screws (not included) in the previously drilled holes.
Also, secure the wall by the fastening fl anges on the
side of the wall. Use the pre-dilled holes.
If needed, use shims to keep wall plumb, square
and leveled. (Cut shim excess)
IMPORTANT: HAND TIGHTEN ONLY. DO NOT
OVER-TIGHTEN THE SCREWS.
Base
Side wall
THE SIDE WALL SHOULD LINE UP WITH
THE BASE
Quick tip 
7.3
Check me!
BEFORE CONTINUING,
VALIDATE THAT ALL
THE WALLS ARE LEVEL,
PLUMB AND SQUARE