Installation Guide

7
2
STEP Installing the base
B3 / Olympia
Apply silicone around the edge of the drain hole in
the base (surface between the top part of the drain
and the base). Assemble as shown.
HAND TIGHTEN ONLY !
VERIFY THE MAAX LOGO ON THE DRAIN COVER
IS FACING THE RIGHT WAY
REMOVE SILICONE EXCESS!
Install the base (13) pushing it completely against the
studs.
Top view
2.1
Check me!
2.2
Check me!
Cardboard
Rubber
Remove clear plastic fi lm on the base. Use
cardboards on the base fl oor as protection until
the installation is complete.
13
Top view
Flush
Studs
Flush