Installation Guide

6
Build a structure based on the dimensions in the chart
below.
IF STRUCTURE IS ALREADY BUILD CHECK THAT
IT RESPECTS THE DIMENSIONS BELOW
Verify the walls are square, plumb and the fl ooring is
perfectly level.
6"
6"
C
Quick tip 
For leveling the fl oor use self-leveling
mortar.
For a worry free installation follow
all instructions and check them off
as you go.
6"
A
B
C
D
Top view
1.1
Check me!
1.2
Check me!
1.3
Check me!
D
Leveling the fl oor is
critical for wall alignment
Cut out an approximate 6" x 6" opening around
the drain center outlined by measurements C and
D. See image to the right and the chart above.
We
recommend that a plumber completes the drain pipe
connection.
1
STEP Building the structure
Build a structure based on the dimensions in the chart
Before starting make sure to have all
parts and components refer to page 4.
COMPATIBLE BASES No. A B C D
Olympia square 4832 106011
Between
48"- 48 1/4"
33 1/2"
16" 24"
Olympia square 6032
106012
Between
60"- 60 1/4"
16" 8 1/2"
B3 Square 4832
420001-5XX
Between
48"- 48 1/4"
33 1/2" 16"
24"
B3 Round 4832 410001-5XX
B3 Square 4836 420003-5XX
37 1/2" 18"
B3 Round 4836 410003-5XX
B3 Square 6032 420005-5XX
Between
60"- 60 1/4"
33 1/2" 16"
8 1/2"
B3 Round 6032
410005-5XX
B3 Square 6036 420006-5XX
37 1/2" 18"
B3 Round 6036
410006-5XX