Installation Guide

17
Quick tip 
Apply masking tape on both sides
of the joint where you will run a
bead of silicone. Apply the silicone,
smooth with a wet nger then
remove the masking tape.
Check me!
Apply a bead of silicone all along the wall to wall
and wall to base joints. For a smooth nish you can
remove the silicone excess with a damp rag or wet
nger.
9
STEP Silicone
Apply silicone in the previously drilled holes on the side
and back walls. Apply silicone to the rear of the shelf
brackets (6).
Fasten the brackets in place using the screws (7).
10
STEP Glass shelf installation
7
6
6
10.1
Check me!
All faucets installed on the walls
must be sealed with silicone.
Remove protective lm from walls
When installing the faucet
faceplate or any other
component, be sure to
silicone the outer edge.