Installation Guide

18
Clean the top rubber part of the brackets with a damp
cloth, then place the glass shelf (5) over the brackets (6).
5
6
6
Insert the washers (8) in the shelf support cap (9). Align
and insert the shelf support caps (9) with the holes of
the glass and the holes of the shelf brackets (6). Screw
from the bottom of the shelf with the # 10 x ½'' screws
(10) and tighten by hand with the Allen key (11).
9
10
6
8
11
7
10
STEP Glass shelf installation (cont'd)
Quick tip 
If you can read the MAAX logo, the
shelf is installed on the right side.
Align oblong holes
10.2
Check me!
10.3
Check me!
Do not overtight the support cap (9)