Installation Sheet

ManualsBrandsMaax ManualsPlumbingSonoma 58 x 32 AcrylX Freestanding Center Drain Bathtub

SAVE THIS GUIDE FOR FUTURE REFERENCE.

CONSERVER POUR UN USAGE ULTÉRIEUR.

Read all instructions carefully before proceeding.

Lire toutes les instructions attentivement avant de commencer l’installation.

Serial number • Numéro de série

IMPORTANT • Record the serial number

IMPORTANT • Noter le numéro de série

A two person installation is recommended.

Une installation par deux

personnes est recommandé.

INSTALLATION INSTRUCTIONS

GUIDE D’INSTALLATION

FREESTANDING BATHTUB

BAIGNOIRE AUTOPORTANTE

1 2

1. F² Drain video (english)

2. Vidéo pour F² Drain (français)

View F² Drain Video - Scan QR

code with a mobile device

Voir Vidéo de F² Drain - Balayer QR

code avec un dispositif mobile

Ver video de F² Drain - Escanear

código QR con un dispositivo mobil

MODEL • MODÈLE

103901 • 103903 • 105516 • 105797 • 105798 • 106150 • 106151 • 106192 • 106193 • 106426

106839 • 106840 • 106841 • 106842 • 106843 • 106902 • 106903 • 106942 • 106992 • 106993

106994 • 106995 • 106996 • 106997

Summary of content (16 pages)

PAGE 1
View F² Drain Video - Scan QR code with a mobile device 2 Voir Vidéo de F² Drain - Balayer QR code avec un dispositif mobile Ver video de F² Drain - Escanear código QR con un dispositivo mobil 1. F² Drain video (english) 2.
PAGE 2
Table of contents: Page Before you begin.................................................................................................................3 Tools and supplies...............................................................................................................4 1. Unpacking the unit...........................................................................................................5 2. Leveling legs adjustment............................................................
PAGE 3
If the optional F² Drain kit was purchased, please refer to 10032746 installation guide before installing the bathtub Si l’ensemble optionnal F² Drain a été acheté, s’il vous plaît se référer au guide d’installation 10032746 avant d’installer la baignoire BEFORE YOU BEGIN • Carefully read the all the instructions in the manual before beginning the installation. • Consult local building codes to make sure the installation complies with standards. • Remove the unit from its packaging.
PAGE 4
TOOLS OUTILS REQUIRED REQUIS ⅛" -drill bit Mèche de ⅛ po.
PAGE 5
Follow all instructions and check them off as you go. Suivre toutes les instructions et les cocher lorsqu'elles sont terminées. STEP ÉTAPE 1 Do not remove the Technical Identification number, doing so may void the warranty. This number may be found at the back of the tub or above the drain, It is recommended to take note of the number so that it is easier to access. Unpacking the unit Déballage de l'unité Cut the cardboard box so as to keep one side to protect the bathtub while is upside down.
PAGE 6
STEP ÉTAPE 2 Leveling legs adjustment Ajustement des pattes ajustables Place back the skirt in the inverted bathtub. Adjust the legs so that they exceed the top of the edge of the skirt by 1/8". You can use a 2x4 to take the measure as shown. Skirt Jupe Remettre la jupe dans la baignoire inversée. Ajuster les pieds de sorte qu'ils dépassent le haut du bord de la jupe de 1/8 po. Vous pouvez utiliser un 2x4 pour prendre la mesure comme indiqué. 2x4 ⅛" 2.
PAGE 7
STEP ÉTAPE 3 Bathtub skirt and drain positioning Positionnement de la jupe de la baignoire et du drain With the help of the bathtub apron or the optional template, mark the center of the drainage line in relation with the desired position of the bathtub. See also the rough-in information for your model on our website. 3.1 Check me! Cochez-moi! À l'aide du tablier de la baignoire ou du gabarit optionnel, identifier le centre de la ligne de drainage par rapport à la position désirée de la baignoire.
PAGE 8
STEP ÉTAPE 4 Installing faucets (NOT INCLUDED) Installation de la robinetterie (NON INCLUSE) Faucet elements must be installed in the intended area. See also the rough-in information for your model on our website. Before drilling, position the faucet base to make sure they line up with the predrilled holes. Mark the location of the faucets on the unit and drill 3/16" (5 mm) pilot holes. Make sure the holes line up with the plumbing. 4.
PAGE 9
STEP ÉTAPE 5 Bathtub preparation and installation Preparation et installation de la baignoire Install the waste and overflow and faucets according to the manufacturer's instruction manuals. 5.1 Check me! Cochez-moi! Installer le trop plein et les robinets en suivant le guide d'installation du manufacturier. Some baths may have the drain and overflow pre-installed. Certains bains peuvent avoir le drain et trop plein pré-installé. Install the valves and faucets at this stage.
PAGE 10
STEP ÉTAPE 5 Bathtub preparation and installation (cont'd) Preparation et installation de la baignoire (suite) For model Serenade (105516) ONLY: Pour le modèle Serenade (105516) SEULEMENT: We recommend using a flexible drainpipe #10025755-XXX for an optimum installation. Consult local plumbing and building codes to assure this waste and overflow meets your local regulations. Do not use straight piping for the overflow. This bathtub model requires flexible piping.
PAGE 11
STEP ÉTAPE 5 Bathtub preparation and installation (cont'd) Preparation et installation de la baignoire (suite) For model Serenade F (105516) EQUIPPED WITH A BLOWER ONLY: Pour le modèle Serenade F (105516) ÉQUIPÉ AVEC UN SOUFFLEUR SEULEMENT: Using the bathtub apron, trace the required lines and make the required openings in the floor, without exceeding the apron; •AEROSENS system bathtub: make an opening in the floor to receive drain pipe and supply tubing.
PAGE 12
STEP ÉTAPE 5 Bathtub preparation and installation (cont'd) Preparation et installation de la baignoire (suite) Apply a silicone seal under the apron (optional). According to bathroom flooring, use proper screws (not included) to secure the skirt to the floor. 5.2 Check me! Cochez-moi! Appliquer un joint de silicone sous la jupe (facultatif). Dépendant de la finition du plancher utiliser des vis appropiées (non fournies) Make sure the skirt is level. S’assurer que la jupe est de niveau.
PAGE 13
STEP ÉTAPE 5 Bathtub preparation and installation (cont'd) Preparation et installation de la baignoire (suite) Remove the spacers. Make sure all the legs are in contact with the ground, so that the bathtub is not supported by the skirt (see cut view below). The bathtub must be tested before installation is complete. Fill the bathtub to the overflow and inspect for leaks. Tighten and loose connections between the hoses and motor by hand. 5.4 Check me! Cochez-moi! Enlever les espaceurs.
PAGE 14
TOUBLESHOOTING Water accumulates around the drain and the bathtub does not completely empty. • Check that the installation is leveled and that the bathtub is well supported by the legs. With the help of level, place at the bottom of the bathtub, make sure to have a slight slope towards the drain. If necessary, adjust the legs under the bathtub. Bottom of bathtub moves during use. • Bathtub is not sitting firmly on its base; adjust leveling legs. Polyethylene film will not come off.
PAGE 15
LIMITED WARRANTY — UNITED STATES MAAX Bath Inc. offers express limited warranty on each of its products. This warranty extends only to the original owner/end-user for personal household use. For commercial uses, additional limitations apply. For accessing product Limited warranty please visit: www.maax.com/us-warranty LIMITED WARRANTY — CANADA MAAX Bath Inc. offers express limited warranty on each of its products. This warranty extends only to the original owner/end-user for personal household use.
PAGE 16
www.maax.com Technical Services / Service technique / Servicio técnico T. 1 877 GET-MAAX (1 877 438-6229) F. 1 888 361-2045 © 2020 MAAX Bath Inc.