Installation Guide

ManualsBrandsMAAX ManualsShower Doors135665-981-172-000

MODEL • MODÈLE • MODELO

Steam kit 10068700 for frameless tub and shower sliding door Aura, Kameleon, Tonik

Kit bain de vapeur 10068700 pour porte de baignoire et douche coulissante sans cadre Aura, Kameleon, Tonik

Conjunto baño de vapor 10068700 para puerta corrediza de bañera y ducha sin marco Aura, Kameleon, Tonik

INSTALLATION INSTRUCTIONS

GUIDE D’INSTALLATION

GUÍA DE INSTALACIÓN

Summary of content (4 pages)

PAGE 1
INSTALLATION INSTRUCTIONS GUIDE D’INSTALLATION GUÍA DE INSTALACIÓN MODEL • MODÈLE • MODELO Steam kit 10068700 for frameless tub and shower sliding door Aura, Kameleon, Tonik Kit bain de vapeur 10068700 pour porte de baignoire et douche coulissante sans cadre Aura, Kameleon, Tonik Conjunto baño de vapor 10068700 para puerta corrediza de bañera y ducha sin marco Aura, Kameleon, Tonik 1 2 2 1 3 4 2 4 3 3
PAGE 2
PARTS AND COMPONENTS PIÈCES ET COMPOSANTES PIEZAS Y COMPONENTES 3 2 4 1 # Part 1 Header bubble seal 2 Glass panel top seal 22" 2 Glass panel top seal 28" 3 Glass panel side seal 4 Water seal Nom de la pièce Pieza Joint d'étanchéité de la moulure supérieure Joint d'étanchéité supérieur de panneau en verre 22" Joint d'étanchéité supérieur de panneau en verre 28" Joint d'étanchéité lateral de panneau en verre Junta de estanqueidad del riel superior Junta de estanqueidad superior de los
PAGE 3
1 PARTS AND COMPONENTS PIÈCES ET COMPOSANTES PIEZAS Y COMPONENTES STEP ÉTAPE ETAPA A. Remove the protective backing from the adhesive tape and secure the gasket (1) on the top of the header as shown. If necessary cut the gasket to the desired length. B. In case shower door is installed inside a unit with roof unscrew the wall jambs and lean the whole frame to the inside of the shower in order to be able to secure the gasket (1) on to of the header as shown. 1 A A.
PAGE 4
2 INSTALLATION | INSTALACIÓN STEP ÉTAPE ETAPA A A. Install one one clear top seal (2) over the top edge of a glass panel as shown. Repeat the same operation for the other top seal and glass panel. No adhesives are necessary. B. Install one one clear side seal (3) over the side edge of a glass panel as shown. Repeat the same operation for the other side seal and glass panel. Also insert gasket (4) on the inside of the glass panel. No adhesives are necessary. A.