Owner`s manual
En g l i s h
Fr a n ç a i s
16
CALIFORNIA COOPERAGE
CONTROL SYSTEMS
California Cooperage® Series
Control System
The California Cooperage® Series Control
System oers you the ultimate in spa
control. The LCD window displays current
water temperature, set point water
temperature, and operating mode settings.
Each feature of the system is actuated
through a control panel touch pad. Touch
the appropriate pad to activate the desired
function.
At start up, when power is supplied to the spa,
the controls will operate properly and safely
under the factory settings. The spa will be in
Economy Mode, have a temperature setting
of 100°F (38°C), and a ltration cycle duration
of 2 hours. To fully utilize the unique capabili-
ties of the control system, it is important to
know how to set the temperature, operate the
pumps, operate the light, adjust the mode set-
ting, and change the ltration cycles.
Topside Control for 165 & 167 Control System.
User’s Pads
User’s Pads are the buttons located on the
topside control panel and are used to program
various spa functions (i.e., turn on spa light, set
temperature, etc.). The following table denes
the pads:
Topside Control for 167 Control System.
Topside Control for 504 Control System.
Topside Control for 504 Control System.
Pad Use
Jets 1
Temp
Blower
Light
Jets 2
- Adjust temperature
- Change Mode
- Change Filter Cycle
- Turn spa light on or o
- Change Mode
- Turn Pump 1 on or o
- Set Filter Cycle duration
- Turn Pump 2 on or o
- Turn Blower on or o