Instruction manual

To change the batteries:
1. Open the battery cover,
Fig. 2.
2. Making sure the battery polarity is correct,
install two AAA alkaline batteries, Fig. 3.
3. Close the battery cover, Fig. 4.
NOTE: It is recommended to remove the batteries if the unit will not be
used for an extended period of time.
Setting the Date/Time
1. Press the Time Set Button to enter into the
Time Adjustment mode. The blinking Month will
display, Fig. 1.
2. Press the ‘M’ button to change.
3. Press the Time Set Button to confirm entry.
4. The blinking Date,
Fig. 2, followed by Year, Hour
and Minutes will display. Repeat steps 2 and 3 to
adjust the date/time setting.
5. Your unit is now ready to take a reading, or
press the POWER button to turn the unit off,
Fig. 3.
Press the button
blinking Month
changing Month
confirm the entry
Fig. 1
Fig. 2
8
Battery Installation/Replacement
Replace the batteries when the Low Battery
symbol appears on the display,
Fig. 1, or when
the display remains blank when the POWER
Button is pressed.
Fig. 1
Fig. 2 Fig. 3 Fig. 4
9
Fig. 3