INSTRUCTION MANUAL Deluxe SmartRead ® Plus Automatic Wrist Digital Blood Pressure Monitor with Jumbo Display Model 04-251-001 Please read this instruction manual completely before operating this unit.
Lifetime Limited Warranty Index MABIS Healthcare guarantees that its Digital Blood Pressure Monitor will be free from manufacturing defects under normal use for as long as the original purchaser owns the product. This warranty covers only normal use, and does not apply to use in any clinical or commercial applications. This warranty does not cover batteries or other power sources that may be provided with or used with the Digital Blood Pressure Monitor.
Introduction To achieve the maximum benefit from your blood pressure monitor, we recommend that you first consult with your physician or trained health care professional. Thank you for purchasing an Automatic Blood Pressure Monitor. With proper care and use, your monitor will provide you with many years of reliable readings.
General Blood Pressure Information What is Blood Pressure? Blood pressure is the pressure that is exerted by blood flowing against the walls of the blood vessels throughout your body. Your heart, which is the center of the circulatory system, provides the force for the blood to flow or circulate. When your heart contracts or beats, the blood is forced through the blood vessels increasing the pressure. This is the highest pressure in the cycle or what is referred to as SYSTOLIC BLOOD PRESSURE.
SYSTOLIC (mmHg) DIASTOLIC (mmHg) Optimal Normal High - Normal Mild Hypertension Borderline Moderate Hypertension Severe Hypertension <120 <130 130-139 140-159 140-149 160-179 ≥180 <80 <85 85-89 90-99 90-94 100-109 ≥110 Isolated Systolic Hypertension Borderline ≥140 140-149 <90 <90 CATEGORY Important Information Before Use 1. Blood pressure measurements should only be interpreted by a physician or a trained health care professional who is familiar with your medical history.
Battery Installation/Replacement Setting the Date/Time Replace the batteries when the Low Battery symbol appears on the display, Fig. 1, or when the display remains blank when the POWER Button is pressed. 1. Press the ‘Set’ Button to enter into the Time Adjustment mode. The blinking Month will display, Fig. 1. To change the batteries: 3. Press the ‘Set’ Button to confirm entry. 1. Open the battery cover. 4. The blinking Date, Fig. 2, followed by Year, Hour and Minutes will display.
Setting the Alarm Clock Your automatic digital blood pressure monitor features an alarm clock. The alarm can be set to ring at three different times in the day. The alarm is especially helpful if you are required to measure your blood pressure at specific times (for example: 7:00 a.m., 12:00 p.m. and 10:00 p.m.) To set the alarm clock: 1. Press the Alarm button located between the ‘SET’ button and the POWER button to enter into the alarm mode. 3.
Applying Your Blood Pressure Cuff 6. Wrap and fasten the cuff securely, yet comfortably around your wrist, Fig. 3. Avoid smoking, eating, taking medication, alcohol consumption or physical activity 30 minutes prior to taking a reading. If you are exhibiting signs of stress, avoid taking your measurement until the feeling subsides. Rest 15 minutes prior to taking a reading. NOTE: The left wrist should be used unless you are unable to or should not use your left arm or wrist.
Taking Your Blood Pressure Reading Proceed only after reading the previous sections of this manual. 1 Rest your elbow as shown on a table with your palm facing upward. Raise your hand so that the cuff is at the same level as your heart, Fig. 1. Relax your hand. 2. Press the POWER button. This will turn the power on and start the measurement process. Fig. 1 Systolic 8. The WHO Indicator, located in the lower right corner of the digital display, Fig.
Recalling Measurements in Memory You can recall up to 60 measurements plus an average of the last three (3) measurements stored in the memory. These measurements can be shared with your physician or trained healthcare professional. 1. Press the ‘MEM’ button. The first reading displayed is the averages of the last three (3) measurements stored in memory. The letters ‘AVG’ will appear on the display, Fig. 1.
Description of Display Symbols SYMBOL CONDITION Appears when pulse reading is displayed. Appears when recalling a measurement from memory. ACTION Record pulse reading. If any abnormality occurs during use, please check and correct the following: Condition Correction Display is blank when power is on. Check and correct the polarity of the installed batteries. Reinstall or replace batteries. Measurement incomplete or abnormally low or high values displayed.
Error Codes Product Specifications Err: Pressure is higher than 330 mmHg or setup is incomplete. Name and Model Number EE: 1: Body movement or talking occurred during this reading. Display System Measuring Method Power Source Measuring Range 2: The measurement is incomplete or abnormally low or high values are displayed. Err+ Appears when battery voltage is excessively low. Accuracy Pressurization Deflation Memory Care and Maintenance 1. 2. 3. 4.
Sample Blood Pressure Log MANUAL DE INSTRUCCIONES Monitor Digital para Presión Arterial de Muñeca con SmartRead ® Plus de Lujo con Pantalla Grande Modelo 04-251-001 Sírvase leer toda esta guía antes de operar la unidad.