Instruction manual

9
AC Adapter Installation (Optional)
Fig. 1
Your Mabis Blood Pressure monitor will operate on 4 “AA” batteries
(included) or a standard 6V/600mA AC adapter fitted with a
DIN plug (not included).
To use an AC adapter:
1. Insert the DIN plug
into the socket located
on the left side of the
monitor, Fig. 1.
2. Plug the AC adapter into a main outlet
according to the adapter’s specifications.
3. Test the connection by pressing the power button.
Note:
Your unit will not draw from the batteries while using an AC adapter.
If the AC is interrupted during use, you will need to reinsert the
DIN plug once the power becomes available.