Instruction manual

12
Taking Your Blood Pressure Reading
1. Position the monitor on a flat, stable
surface with the digital display panel
in view. Insert the cuff tubing into the
left side of the monitor,
Fig. A.
2. Rest your elbow on a table with your
palm facing upward. Elevate your hand
so that the cuff is at the same level as
your heart,
Fig. 1. Relax your left hand.
3. Press the power button. The unit will
run a self-test,
Fig. 2.
4. Upon release, beeps will sound and
the display will briefly change to a
flashing symbol,
Fig. 3. The cuff is
ready for automatic inflation.
Proceed only after reading the previous sections of this manual.
Fig. A
Fig. 3
Fig. 2
Measurement value
becomes lower.
Correct measurement
position (at same
height as heart).
Measurement value
becomes higher.
Fig. 1