INSTRUCTION MANUAL ® SmartSpeed Plus Automatic Digital Blood Pressure Monitor with Memory 04-186-001 (Adult size cuff) 04-186-006 (Large adult size cuff) Please read this instruction manual completely before operating this unit.
Lifetime Limited Warranty Index MABIS Healthcare guarantees that its Digital Blood Pressure Monitor will be free from manufacturing defects under normal use for as long as the original purchaser owns the product. This warranty covers only normal use, and does not apply to use in any clinical or commercial applications. This warranty does not cover batteries or other power sources that may be provided with or used with the Digital Blood Pressure Monitor.
Introduction Product Identification and Caution To achieve the maximum benefit from your blood pressure monitor, we recommend that you first consult with your physician or trained health care professional. AC Adapter Connector Set Button Digital Display Time Button Thank you for purchasing an Automatic Blood Pressure Monitor. With proper care and use, your monitor will provide you with many years of reliable readings.
General Blood Pressure Information What is Blood Pressure? Blood pressure is the pressure that is exerted by blood flowing against the walls of the blood vessels throughout your body. Your heart, which is the center of the circulatory system, provides the force for the blood to flow or circulate. When your heart contracts or beats, the blood is forced through the blood vessels increasing the pressure. This is the highest pressure in the cycle or what is referred to as SYSTOLIC BLOOD PRESSURE.
CATEGORY SYSTOLIC (mmHg) DIASTOLIC (mmHg) <120 <130 130-139 140-159 140-149 160-179 ≥180 <80 <85 85-89 90-99 90-94 100-109 ≥110 ≥140 140-149 <90 <90 Optimal Normal High - Normal Mild Hypertension Borderline Moderate Hypertension Severe Hypertension Isolated Systolic Hypertension Borderline This chart is only a general guideline. Please contact your physician to determine your NORMAL BLOOD PRESSURE. Important Information Before Use 1.
Battery Installation/Replacement Setting the Date/Time Replace the batteries when the Low Battery symbol appears on the display, Fig. 1, or when the display remains blank when the POWER button is pressed. To change the batteries: 1. Press the Set Button to enter into the Time Adjustment mode. The blinking Month will display, Fig. 1. 1. Press down and lift the cover in the direction of the arrows as shown, Fig. 2. 3. Press the Set Button to confirm entry. 2.
Applying Your Blood Pressure Cuff Avoid smoking, eating, taking medication, alcohol consumption or physical activity 30 minutes prior to taking a reading. If you are exhibiting signs of stress, avoid taking your measurement until the feeling subsides. Rest 15 minutes prior to taking a reading. NOTE: If for any reason you are unable to or should not use your left arm, please modify the following instructions and apply the cuff to your right arm. Your physician can tell you which arm is best for you to use.
Taking Your Blood Pressure Reading 4. Press the POWER button again to turn the unit on. The unit will run a self-test, Fig. 4. 5. The cuff will automatically begin to inflate, with varying speeds of inflation. Proceed only after reading the previous sections of this manual. Remember! Do not talk during the measurement. 6. The display will show the increasing pressure in the cuff, Fig. 5. 1. Position the monitor on a flat, stable surface with the digital display in view.
Recalling Measurements in Memory You can recall up to 50 measurements plus an average of the three most recently stored measurements in memory from each memory bank. These measurements can be shared with your physician or trained health care professional. Description of Display Symbols SYMBOL CONDITION ACTION 1. Press the MEMORY button. The first reading displayed is the average of the last three measurements stored in memory. The letter ‘A’ wil appear on the display, Fig. 1.
Product Specifications Troubleshooting If any abnormality occurs during use, please check and correct the following: Condition Correction Display is blank when power is on. Check and correct the polarity of the installed batteries. Reinstall or replace batteries. Measurement incomplete or abnormally low or high values displayed. Review and follow ‘Applying Your Blood Pressure Cuff’ and ‘Taking Your Blood Pressure Reading’ sections. Replace the batteries.
Sample Blood Pressure Log MANUAL DE INSTRUCCIONES ® SmartSpeed Plus Monitor Automático Digital para Presión Arterial con Memoria 04-186-001 (Brazalete tamaño adulto) 04-186-006 (Brazalete tamaño adulto grande) Sírvase leer toda esta guía antes de operar la unidad.