Owner`s manual

FIG. 2 OPERATION WITH STEREO CAR RADIO

Connect and set the amplifier as shown in Fig. 2 if it is to be controlled by a car radio with two output channels.

Operation of the low-pass filter used is described in Chapter 5.2.

(1) To the car radio, left output

(2) To the car radio, right output

(3) Subwoofer

FIG. 3 OPERATION WITH ONE CAR RADIO WITH SUBWOOFER OUTPUT

(1) To the car radio, subwoofer output

(2) Subwoofer

FIG. 4 USE AS A SUBWOOFER AMPLIFIER WHILE USING AN ADDITIONAL 4-CHANNEL AMPLIFIER

(MP 4000) FOR 4 SATELLITE LOUDSPEAKERS

(1) To the car radio, front left output

(2) To the car radio, front right output

(3) To the car radio, rear left output

(4) To the car radio, rear right output

(5) Front left loudspeaker

(6) Front right loudspeaker

(7) Rear left loudspeaker

(8) Rear right loudspeaker

(9) Subwoofer

FIG. 5 OPERATING ELEMENTS AND IN/OUTPUTS

(1) Low-level input

(2) Input level control

(3) Bass-booster control

(4) Transfer frequency control for low pass

(5) Cross-over frequency control for the subsonic filter

(6) Outputs for connecting other amplifiers